{"title":"Battery Chargers","description":null,"products":[{"product_id":"victron-orion-tr-smart-non-isolated-dc-dc-converter-24-vdc-to-24-vdc-400w-17amp","title":"Victron Orion-TR Smart Non-Isolated DC-DC Converter - 24 VDC to 24 VDC - 400W - 17AMP","description":"\u003cp\u003e\u003cstrong\u003eOrion-TR Smart Non-Isolated DC-DC Converter - 24 VDC to 24 VDC - 400W - 17AMP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Orion-Tr Smart DC-DC charger is a professional DC-to-DC adaptive 3-stage charger with built-in Bluetooth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBluetooth Smart Enabled:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAny Bluetooth-enabled smartphone, tablet, or other device can be used to monitor, change settings, and update the charger when new software features become available.\u003c\/li\u003e\n\u003cli\u003eInstant Readout: The VictronConnect App can display key data, including warnings and alarms, on the device list page without the need to connect to the product.  \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFully Programmable:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery charge algorithm (configurable) or fixed output. \u003c\/li\u003e\n\u003cli\u003eSmart alternator compatibility: engine running detection mechanism.  \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAdaptive 3-Stage Charge Algorithm: Bulk – Absorption – Float:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor lead-acid batteries, it is important that during shallow discharges the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged.\u003c\/li\u003e\n\u003cli\u003eFor lithium batteries, the absorption time is fixed (the default is 2 hours).\u003c\/li\u003e\n\u003cli\u003eAlternatively, a fixed output voltage can be chosen.  \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRemote On\/Off:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA remote on\/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).  \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll Models Are Short Circuit Proof and Can Be Paralleled to Increase Output Current:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn unlimited number of units can be connected in parallel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHigh Temperature Protected:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe output current will reduce at high ambient temperatures.  \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIP43 Protection:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen installed with the screw terminals oriented downward.  \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScrew Terminals:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo special tools are needed for installation.  \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInput fuse (not replaceable) \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage Range: 20-35 V\u003c\/li\u003e\n\u003cli\u003eUnder Voltage Shut Down: 14 V\u003c\/li\u003e\n\u003cli\u003eUnder Voltage Restart: 15 V\u003c\/li\u003e\n\u003cli\u003eNominal Output Voltage: 24.2 V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Adjust Range: 20-30 V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Tolerance: +\/- 0,2 V\u003c\/li\u003e\n\u003cli\u003eOutput Noise: 2 mV rms\u003c\/li\u003e\n\u003cli\u003eCont. Output Current at Nominal Output Voltage and 40 Degrees C: 17 A\u003c\/li\u003e\n\u003cli\u003eMaximum Output Current (10 S) at Nominal Output Voltage: 25 A\u003c\/li\u003e\n\u003cli\u003eShort Circuit Output Current: 40A\u003c\/li\u003e\n\u003cli\u003eCont. Output Power at 25 Degrees C: 480 W\u003c\/li\u003e\n\u003cli\u003eCont. Output Power at 40 Degrees C: 400 W\u003c\/li\u003e\n\u003cli\u003eEfficiency: 89%\u003c\/li\u003e\n\u003cli\u003eNo Load Input Current (2): \u0026lt; 80 mA \u003c\/li\u003e\n\u003cli\u003eStandby Current: Less than 1 mA\u003c\/li\u003e\n\u003cli\u003eGalvanic Isolation: 200 VDC between input, output, and case\u003c\/li\u003e\n\u003cli\u003eOperating Temperature Range: -20 to +55 Degrees C (derate 3 % per °C above 40 °C)\u003c\/li\u003e\n\u003cli\u003eHumidity: Max. 95 % non-condensing\u003c\/li\u003e\n\u003cli\u003eDC Connection: Screw terminals\u003c\/li\u003e\n\u003cli\u003eMaximum Cable Cross-Section: 16 mm² AWG6\u003c\/li\u003e\n\u003cli\u003eWeight: 1,6 kg (3.5 lb)\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D): 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch)\u003c\/li\u003e\n\u003cli\u003eProtection Category: IP43 (electronic components), IP22 (connection area)\u003c\/li\u003e\n\u003cli\u003eSafety Standards: EN 60950\u003c\/li\u003e\n\u003cli\u003eImmunity Standards: EN 61000-6-2, EN 61000-6-1, EN 55014-2\u003c\/li\u003e\n\u003cli\u003eAutomotive Directive Standards: ECE R10-5\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":46488207818822,"sku":"GCO-100042","price":215.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/100042XL_f91f77df-7b59-4bae-aaca-3b712e4d50ec.jpg?v=1788867443"},{"product_id":"dolphin-charger-prolite-series-dolphin-battery-charger-12v-15a-110vac-2-outputs","title":"Dolphin Charger PROLITE Series Dolphin Battery Charger - 12V, 15A, 110VAC - 2 Outputs","description":"\u003cp\u003e\u003cstrong\u003ePROLITE Series Dolphin Battery Charger - 12V, 15A, 110VAC - 2 Outputs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDolphin Chargers are known as a yacht-quality product that is professionally designed and manufactured in Europe with the latest components to be more efficient and reliable than the competition. In 2019, Dolphin set out to create this line of small, water-resistant chargers with the same philosophy for the outboard and gasoline boat markets. The PROLITE chargers are smaller, lighter, and more efficient than the competition and boast the latest in connectivity with a standard Bluetooth interface. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Dolphin Connect App (iOS and Android) will allow you to monitor and control your charger from your mobile device\u003c\/li\u003e\n\u003cli\u003eAutomatically senses and distributes 100% of available charging amps to any one bank or combination of all banks\u003c\/li\u003e\n\u003cli\u003e40% smaller and 50% lighter than most competitors\u003c\/li\u003e\n\u003cli\u003eIncludes 6 ft. AC and DC cables and fusing\u003c\/li\u003e\n\u003cli\u003e15 amp has 2 outputs\u003c\/li\u003e\n\u003cli\u003eIP 65 water resistant\u003c\/li\u003e\n\u003cli\u003eISO-certified 8846 for use in gasoline boats\u003c\/li\u003e\n\u003cli\u003eWorks with any battery technology on the market\u003c\/li\u003e\n\u003cli\u003eWill charge from 0 VDC\u003c\/li\u003e\n\u003cli\u003eBluetooth interface\u003c\/li\u003e\n\u003cli\u003eSimple installation\u003c\/li\u003e\n\u003cli\u003e92% Super efficient\u003c\/li\u003e\n\u003cli\u003e12V - 15A\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Dolphin Charger","offers":[{"title":"Default Title","offer_id":46488242356294,"sku":"GCO-100203","price":471.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/100203XL_a204cda5-318b-48ac-a2c5-89b1016904f4.jpg?v=1788867951"},{"product_id":"dolphin-charger-prolite-series-dolphin-battery-charger-12v-25a-110-220vac-3-outputs","title":"Dolphin Charger PROLITE Series Dolphin Battery Charger - 12V, 25A, 110\/220VAC - 3 Outputs","description":"\u003cp\u003e\u003cstrong\u003ePROLITE Series Dolphin Battery Charger - 12V, 25A, 110\/220VAC - 3 Outputs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDolphin Chargers are known as a yacht-quality product that is professionally designed and manufactured in Europe with the latest components to be more efficient and reliable than the competition. In 2019, Dolphin set out to create this line of small, water-resistant chargers with the same philosophy for the outboard and gasoline boat markets. The PROLITE chargers are smaller, lighter, and more efficient than the competition and boast the latest in connectivity with a standard Bluetooth interface. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Dolphin Connect App (iOS and Android) will allow you to monitor and control your charger from your mobile device\u003c\/li\u003e\n\u003cli\u003eAutomatically senses and distributes 100% of available charging amps to any one bank or combination of all banks\u003c\/li\u003e\n\u003cli\u003e40% smaller and 50% lighter than most competitors\u003c\/li\u003e\n\u003cli\u003eIncludes 6 ft. AC and DC cables and fusing\u003c\/li\u003e\n\u003cli\u003e25 amp has 3 outputs\u003c\/li\u003e\n\u003cli\u003eIP 65 water resistant\u003c\/li\u003e\n\u003cli\u003eISO-certified 8846 for use in gasoline boats\u003c\/li\u003e\n\u003cli\u003eWorks with any battery technology on the market\u003c\/li\u003e\n\u003cli\u003eWill charge from 0 VDC\u003c\/li\u003e\n\u003cli\u003eBluetooth interface\u003c\/li\u003e\n\u003cli\u003eSimple installation\u003c\/li\u003e\n\u003cli\u003e92% Super efficient\u003c\/li\u003e\n\u003cli\u003e12V - 25A\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Dolphin Charger","offers":[{"title":"Default Title","offer_id":46488242389062,"sku":"GCO-100204","price":668.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/100204XL_4a10960d-4d38-4fb3-a9d7-c30ec40b0b0f.jpg?v=1788867954"},{"product_id":"dolphin-charger-premium-series-dolphin-battery-charger-12v-40a-110-220vac-3-outputs","title":"Dolphin Charger Premium Series Dolphin Battery Charger - 12V, 40A, 110\/220VAC - 3 Outputs","description":"\u003cp\u003e\u003cstrong\u003ePremium Series Dolphin Battery Charger - 12V, 40A, 110\/220VAC - 3 Outputs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Premium range of chargers is perfect for most of today’s battery technologies, with a load capacity of up to 400 amps at 12V. These compact chargers are ideally suited to recharging batteries in light vehicles, ambulances, repair vehicles, and motorhomes. The Premium charger is perfect for workshops, pleasure boats, computer cabinets, and starter batteries for gen-sets.\u003c\/p\u003e\u003cp\u003eThe robust compact housing is lighter and easier to install than ever thanks to better mounting design and electrical speed connections. Outstanding features include the latest battery charging technology and a new charging program for lithium-ion-iron-phosphate batteries. These chargers come in a nice package, making them ideal for retailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12V, 40A\u003c\/li\u003e\n\u003cli\u003eDigital management with up-to-date RISC micro-controller\u003c\/li\u003e\n\u003cli\u003e4 charging programs, including one for Lithium-Ion-Iron-Phosphate with integrated BMS.\u003c\/li\u003e\n\u003cli\u003eCharging program selection by internal dip switch.\u003c\/li\u003e\n\u003cli\u003eAutomatic weekly equalization for all charging programs \u003c\/li\u003e\n\u003cli\u003eThanks to the Winsta (Wago) and Phoenix contact connectors, wiring and connections are easy and user-friendly.\u003c\/li\u003e\n\u003cli\u003e3 completely isolated battery outputs.\u003c\/li\u003e\n\u003cli\u003eManual Night Mode (Silent – fan turned off) by push-button is included with 12V-40A and 24V-20A\u003c\/li\u003e\n\u003cli\u003eAutomatic 115\/230V switch-over\u003c\/li\u003e\n\u003cli\u003eTouchview controller connection 12V-60A and 24V-30A\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Dolphin Charger","offers":[{"title":"Default Title","offer_id":46488242454598,"sku":"GCO-100205","price":974.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/100205XL_678b4ccf-424c-46fc-8238-e9c92a8090fe.jpg?v=1788867960"},{"product_id":"dolphin-charger-premium-series-dolphin-battery-charger-12v-60a-110-220vac-3-outputs","title":"Dolphin Charger Premium Series Dolphin Battery Charger - 12V, 60A, 110\/220VAC - 3 Outputs","description":"\u003cp\u003e\u003cstrong\u003ePremium Series Dolphin Battery Charger - 12V, 60A, 110\/220VAC - 3 Outputs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Premium range of chargers is perfect for most of today’s battery technologies, with a load capacity of up to 400 amps at 12V. These compact chargers are ideally suited to recharging batteries in light vehicles, ambulances, repair vehicles, and motorhomes. The Premium charger is perfect for workshops, pleasure boats, computer cabinets, and starter batteries for gen-sets.\u003c\/p\u003e\u003cp\u003eThe robust compact housing is lighter and easier to install than ever thanks to better mounting design and electrical speed connections. Outstanding features include the latest battery charging technology and a new charging program for lithium-ion-iron-phosphate batteries. These chargers come in a nice package, making them ideal for retailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12V, 60A\u003c\/li\u003e\n\u003cli\u003eDigital management with up-to-date RISC micro-controller\u003c\/li\u003e\n\u003cli\u003e4 charging programs, including one for Lithium-Ion-Iron-Phosphate with integrated BMS.\u003c\/li\u003e\n\u003cli\u003eCharging program selection by internal dip switch.\u003c\/li\u003e\n\u003cli\u003eAutomatic weekly equalization for all charging programs \u003c\/li\u003e\n\u003cli\u003eThanks to the Winsta (Wago) and Phoenix contact connectors, wiring, and connections are easy and user-friendly.\u003c\/li\u003e\n\u003cli\u003e3 completely isolated battery outputs.\u003c\/li\u003e\n\u003cli\u003eManual Night Mode (Silent – fan turned off) by push-button is included with 12V-40A and 24V-20A\u003c\/li\u003e\n\u003cli\u003eAutomatic 115\/230V switch-over\u003c\/li\u003e\n\u003cli\u003eTouchview controller connection \u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Dolphin Charger","offers":[{"title":"Default Title","offer_id":46488242487366,"sku":"GCO-100206","price":1210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/100206XL_be6eabcf-7a49-457b-af2d-4567626a549d.jpg?v=1788867963"},{"product_id":"dolphin-charger-pro-series-dolphin-battery-charger-12v-90a-110-220vac-50-60hz","title":"Dolphin Charger Pro Series Dolphin Battery Charger - 12V, 90A, 110\/220VAC - 50\/60Hz","description":"\u003cp\u003e\u003cstrong\u003ePro Series Dolphin Battery Charger - 12V, 90A, 110\/220VAC - 50\/60Hz\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Dolphin Series of battery chargers has always been recognized for its outstanding quality, which the manufacturer is proud to support with a 2-year warranty. Due to production on a wide scale, Dolphin is able to offer high-quality, truly international battery chargers at a reasonable price.\u003c\/p\u003e\u003cp\u003eThe Pro Range, which allows battery banks of up to 1000 amps to be charged, can be equipped with an optional touch-view touchscreen. It provides an intuitive display of measurements as well as charging phases (boost, absorption, and float), the allocated available power, and possible operating faults. The Pro range is equipped with communication via CAN bus, which means it can be used professionally in all land and industrial energy management sectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12V-90A Dolphin Pro\u003c\/li\u003e\n\u003cli\u003eAll Dolphin Battery Chargers and accessories are CE-marked and manufactured to UL and ABYC specifications\u003c\/li\u003e\n\u003cli\u003eThe Pro Touch Range features a built-in TouchView remote in place of the standard display panel on the Pro chargers\u003c\/li\u003e\n\u003cli\u003eThe Touchview control panel gives the user more information and control of the charger functions\u003c\/li\u003e\n\u003cli\u003eLED Display for programming and monitoring functions\u003c\/li\u003e\n\u003cli\u003eTemperature sensor for battery compensation\u003c\/li\u003e\n\u003cli\u003eSwitch mode technology and a three-stage charging design with a power supply\u003c\/li\u003e\n\u003cli\u003eModern, lightweight, and compact design with white aluminum powder-coated casing\u003c\/li\u003e\n\u003cli\u003e4 screw simple install with easy access removable panel\u003c\/li\u003e\n\u003cli\u003eISO 9002-certified manufacturing plant\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThree-Stage Charging Curve\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBulk Stage: A high current is sent to the battery until it reaches approximately 80% of its full charge.\u003c\/p\u003e\u003cp\u003eAbsorption Stage: The voltage level is maintained and the current is reduced until the battery is 100% charged. \u003c\/p\u003e\u003cp\u003eFloat Stage: Voltage and current are reduced to maintain the battery. Float gives what the battery requires.\u003c\/p\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Dolphin Charger","offers":[{"title":"Default Title","offer_id":46488242520134,"sku":"GCO-100207","price":2123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/100207XL_ee6b3584-7710-4468-a8f1-ca4c4a13f8c3.jpg?v=1788867967"},{"product_id":"dolphin-charger-premium-series-dolphin-battery-charger-24v-30a","title":"Dolphin Charger Premium Series Dolphin Battery Charger - 24V, 30A","description":"\u003cp\u003e\u003cstrong\u003ePremium Series Dolphin Battery Charger - 24V, 30A\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Premium range of chargers is perfect for most of today’s battery technologies, with a load capacity of up to 400 amps at 12V. These compact chargers are ideally suited to recharging batteries in light vehicles, ambulances, repair vehicles, and motorhomes. The Premium charger is perfect for workshops, pleasure boats, computer cabinets, and starter batteries for gen-sets.\u003c\/p\u003e\u003cp\u003eThe robust compact housing is lighter and easier to install than ever thanks to better mounting design and electrical speed connections. Outstanding features include the latest battery charging technology and a new charging program for lithium-ion-iron-phosphate batteries. These chargers come in a nice package, making them ideal for retailers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24V, 30A\u003c\/li\u003e\n\u003cli\u003eDigital management with up-to-date RISC micro-controller\u003c\/li\u003e\n\u003cli\u003e4 charging programs, including one for Lithium-Ion-Iron-Phosphate with integrated BMS.\u003c\/li\u003e\n\u003cli\u003eCharging program selection by internal dip switch.\u003c\/li\u003e\n\u003cli\u003eThanks to the Winsta (Wago) and Phoenix contact connectors, wiring, and connections are easy and user-friendly.\u003c\/li\u003e\n\u003cli\u003e3 completely isolated battery outputs.\u003c\/li\u003e\n\u003cli\u003eAutomatic 115\/230V switch-over\u003c\/li\u003e\n\u003cli\u003eTouchview controller connection\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Dolphin Charger","offers":[{"title":"Default Title","offer_id":46488242552902,"sku":"GCO-100208","price":1215.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/100208XL_3b155563-014c-4e89-aaa8-cce69657717a.jpg?v=1788867971"},{"product_id":"dolphin-charger-pro-series-dolphin-battery-charger-24v-60a-110-220vac-50-60hz","title":"Dolphin Charger Pro Series Dolphin Battery Charger - 24V, 60A, 110\/220VAC - 50\/60Hz","description":"\u003cp\u003e\u003cstrong\u003ePro Series Dolphin Battery Charger - 24V, 60A, 110\/220VAC - 50\/60Hz\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Dolphin Series of battery chargers has always been recognized for its outstanding quality, which the manufacturer is proud to support with a 2-year warranty. Due to production on a wide scale, Dolphin is able to offer high-quality, truly international battery chargers at a reasonable price.\u003c\/p\u003e\u003cp\u003eThe Pro Range, which allows battery banks of up to 1000 amps to be charged, can be equipped with an optional touch view touchscreen. It provides an intuitive display of measurements as well as charging phases (boost, absorption, and float), the allocated available power, and possible operating faults. The Pro range is equipped with communication via CAN bus, which means it can be used professionally in all land and industrial energy management sectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24V-60A Dolphin Pro\u003c\/li\u003e\n\u003cli\u003eAll Dolphin Battery Chargers and accessories are CE-marked and manufactured to UL and ABYC specifications\u003c\/li\u003e\n\u003cli\u003eThe Pro Touch Range features a built-in TouchView remote in place of the standard display panel on the Pro chargers\u003c\/li\u003e\n\u003cli\u003eThe Touchview control panel gives the user more information and control of the charger functions\u003c\/li\u003e\n\u003cli\u003eLED Display for programming and monitoring functions\u003c\/li\u003e\n\u003cli\u003eTemperature sensor for battery compensation\u003c\/li\u003e\n\u003cli\u003eSwitch mode technology and a three-stage charging design with a power supply\u003c\/li\u003e\n\u003cli\u003eModern, lightweight, and compact design with white aluminum powder-coated casing\u003c\/li\u003e\n\u003cli\u003e4 screw simple install with easy access removable panel\u003c\/li\u003e\n\u003cli\u003eISO 9002-certified manufacturing plant\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThree-Stage Charging Curve\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBulk Stage: A high current is sent to the battery until it reaches approximately 80% of its full charge.\u003c\/p\u003e\u003cp\u003eAbsorption Stage: The voltage level is maintained and the current is reduced until the battery is 100% charged. \u003c\/p\u003e\u003cp\u003eFloat Stage: Voltage and current are reduced to maintain the battery. Float gives what the battery requires.\u003c\/p\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Dolphin Charger","offers":[{"title":"Default Title","offer_id":46488242585670,"sku":"GCO-100209","price":1872.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/100209XL_7f55e435-763a-4cd7-b4c8-241ca7e5b26e.jpg?v=1789766470"},{"product_id":"dolphin-charger-pro-series-dolphin-battery-charger-24v-100a-230vac-50-60hz","title":"Dolphin Charger Pro Series Dolphin Battery Charger - 24V, 100A, 230VAC - 50\/60Hz","description":"\u003cp\u003e\u003cstrong\u003ePro Series Dolphin Battery Charger - 24V, 100A, 230VAC - 50\/60Hz\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Dolphin Series of battery chargers has always been recognized for its outstanding quality, which the manufacturer is proud to support with a 2-year warranty. Due to production on a wide scale, Dolphin is able to offer high-quality, truly international battery chargers at a reasonable price.\u003c\/p\u003e\u003cp\u003eThe Pro Range, which allows battery banks of up to 1000 amps to be charged, can be equipped with an optional touchview touchscreen. It provides an intuitive display of measurements as well as charging phases (boost, absorption, and float), the allocated available power, and possible operating faults. The Pro range is equipped with communication via CAN bus, which means it can be used professionally in all land and industrial energy management sectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24V-100A Dolphin Pro (230 VAC 50\/60 Hz input voltage only)\u003c\/li\u003e\n\u003cli\u003eAll Dolphin Battery Chargers and accessories are CE-marked and manufactured to UL and ABYC specifications\u003c\/li\u003e\n\u003cli\u003eThe Pro Touch Range features a built-in TouchView remote in place of the standard display panel on the Pro chargers \u003c\/li\u003e\n\u003cli\u003eThe Touchview control panel gives the user more information and control of the charger functions\u003c\/li\u003e\n\u003cli\u003eLED Display for programming and monitoring functions\u003c\/li\u003e\n\u003cli\u003eTemperature sensor for battery compensation\u003c\/li\u003e\n\u003cli\u003eSwitch mode technology and a three-stage charging design with a power supply\u003c\/li\u003e\n\u003cli\u003eModern, lightweight, and compact design with white aluminum powder-coated casing\u003c\/li\u003e\n\u003cli\u003eUniversal AC input with automatic voltage switching 115\/230 VAC 50\/60 Hz (24V-80A, 24V-100A, and 24V-150A are 230VAC 50\/60 Hz ONLY)\u003c\/li\u003e\n\u003cli\u003e4 screw simple install with easy access removable panel\u003c\/li\u003e\n\u003cli\u003eISO 9002-certified manufacturing plant\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThree-Stage Charging Curve\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBulk Stage: A high current is sent to the battery until it reaches approximately 80% of its full charge.\u003c\/p\u003e\u003cp\u003eAbsorption Stage: The voltage level is maintained and the current is reduced until the battery is 100% charged. \u003c\/p\u003e\u003cp\u003eFloat Stage: Voltage and current are reduced to maintain the battery. Float gives what the battery requires.\u003c\/p\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Dolphin Charger","offers":[{"title":"Default Title","offer_id":46488243634246,"sku":"GCO-100211","price":3052.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/100211XL.jpg?v=1789766470"},{"product_id":"victron-gx-lte-4g-a-cellular-modem-f-gx-devices-north-america-only","title":"Victron GX LTE 4G-A Cellular Modem f\/GX Devices - North America Only","description":"\u003cp\u003e\u003cstrong\u003eGX LTE 4G-A Cellular Modem for GX Devices - North America Only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe GX LTE 4G is an accessory for GX devices. It is a cellular modem that supports 2G, 3G, and 4G technologies. It provides mobile internet for the system and a connection to the Victron Remote Management (VRM) portal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt-in GPS Receiver\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe GX LTE 4G includes a built-in GPS receiver. When the optional active GPS antenna is installed, the system can be tracked as well as geo-fenced on the VRM Portal.\u003c\/p\u003e\u003cp\u003eThe required accessory part number is GSM900200100 - Active GPS Antenna for GX GSM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGX Compatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe GX LTE 4G can be used with any of the GX devices and requires Venus OS v2.60 or newer to be installed on the GX device.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSIM Card\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt requires a SIM card in the Mini-SIM format.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to Use a Mobile Router Instead\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe GX LTE 4G provides an internet connection for the GX device only. There is no option to share the internet with laptops, phones, or other devices. For installations where more devices need internet, such as a yacht or RV, consider installing a mobile router instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAntennas and Accessories\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA small indoor LTE antenna is included. Optionally, Victron sells an outdoor LTE antenna, which increases the range.\u003c\/p\u003e\u003cp\u003ePart number GSM900100400 - Outdoor 4G GSM Antenna.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRegion: For North America\u003c\/li\u003e\n\u003cli\u003eUsed Module: SIMCom, SIM7600A\u003c\/li\u003e\n\u003cli\u003eSupported LTE Bands: 2, 4, 12\u003c\/li\u003e\n\u003cli\u003eSupply Voltage Range: 8 - 70VDC\u003c\/li\u003e\n\u003cli\u003ePower Draw: 2.5W while 2G\/3G\/4G data transfer \/ \u0026lt;1.0W in idle mode \/ +0.4W if GPS is enabled\u003c\/li\u003e\n\u003cli\u003eOperating Temperature Range: -40 +50°C (-40 - 120°F)\u003c\/li\u003e\n\u003cli\u003ePower Cable (Included): 1.4m cable with inline fuse holder, terminal block, and 10mm ring terminals\u003c\/li\u003e\n\u003cli\u003eInline Fuse (included): T3.15A250V\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommunication Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUSB Communication Port: Fixed 1.0m cable with USB-A connector (connects to the GX device)\u003c\/li\u003e\n\u003cli\u003eLTE Antenna Connector: Type SMA Female (optional 4G outdoor antenna GSM900100400)\u003c\/li\u003e\n\u003cli\u003eGPS Antenna Connector: Type SMA Female (optional GPS antenna GSM900200100)\u003c\/li\u003e\n\u003cli\u003eGNSS: GPS\/Beidou\/GLONASS\/GALILEO\/QZSS\u003c\/li\u003e\n\u003cli\u003eSIM Card: Regular Mini SIM (supports both 1.8V and 3V)\u003c\/li\u003e\n\u003cli\u003eData Transmission (max. Download\/Upload) LTE Cat-1: 10 Mbps \/ 5 Mbps\u003c\/li\u003e\n\u003cli\u003eData Transmission (max. Download\/Upload) 3G (HSPA+): 42 Mbps \/ 5.76 Mbps\u003c\/li\u003e\n\u003cli\u003eData Transmission (max. Download\/Upload) 2G (EDGE): 236.8 Kbps \/ 236.8 Kbps\u003c\/li\u003e\n\u003cli\u003eData Transmission (max. Download\/Upload) 2G (GPRS): 85.6 Kbps \/ 85.6 Kbps\u003c\/li\u003e\n\u003cli\u003eStatus Indicator: Blue LED\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDimensions (l x w x h): 106 × 42.5 × 22mm\u003c\/li\u003e\n\u003cli\u003eWeight: 0.08kg (0.177lbs)\u003c\/li\u003e\n\u003cli\u003eWire Gauge (power cable): 0.5..1.5mm2 \/ AWG 28..16 or use supplied power cable\u003c\/li\u003e\n\u003cli\u003eRecommended Fuse Size: 500mA @ 12V \/ 250mA @ 24V \/ 100mA @ 48V or use supplied inline fuse\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGX LTE 4G (with integrated USB cable)\u003c\/li\u003e\n\u003cli\u003eGSM 2G\/3G\/4G mini-rod antenna (for indoor use)\u003c\/li\u003e\n\u003cli\u003eDC power cable (with inline fuse and terminal block)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eStandrads:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSafety: EN 60335-1 \/ EN 60335-2-29 \/ EN 62368-1\u003c\/li\u003e\n\u003cli\u003eEmission \/ Immunity: ECE R10-5\u003c\/li\u003e\n\u003cli\u003eQM: EN 9001:2015\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":46488254283846,"sku":"GCO-100480","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/100480XL.jpg?v=1789728437"},{"product_id":"dual-pro-realpro-series-battery-charger-24a-4-bank","title":"Dual Pro RealPRO Series Battery Charger - 24A - 4-Bank","description":"\u003cp\u003e\u003cstrong\u003eRealPRO Series Battery Charger - 24A - 4-Bank\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRealPro Series battery chargers (formerly Recreation Series) are an affordable, reliable, and safe battery charging system designed for everyday use. The system is engineered for users who need a charging system on an occasional basis and may not want or need the capabilities of a heavier-duty and higher-amperage product.\u003c\/p\u003e\u003cp\u003eIt is designed for use in many types of applications, including bass boats, runabouts, pontoon boats, other watercraft, automobiles, ATVs, golf carts, and other similar uses. The system delivers sophisticated capabilities and superior value to customers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBattery Charging Systems Designed for Everyday Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAffordable, reliable, and safe\u003c\/li\u003e\n\u003cli\u003eUnmatched performance, reliability, safety, and quality\u003c\/li\u003e\n\u003cli\u003eTROUBLE FREE – Just Plug It In and Forget It!\u003c\/li\u003e\n\u003cli\u003eJoin Over 750,000 satisfied customers!\u003c\/li\u003e\n\u003cli\u003eWide variety of applications\u003c\/li\u003e\n\u003cli\u003eUniversal input (100-240 VAC 50\/60HZ)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4 bank battery charger \u003c\/li\u003e\n\u003cli\u003eApproved for wet cell and absorbed glass mat (AGM) batteries\u003c\/li\u003e\n\u003cli\u003eDesigned for use in fresh and saltwater\u003c\/li\u003e\n\u003cli\u003eDependable, rugged construction, and waterproof\u003c\/li\u003e\n\u003cli\u003eIndependent outputs and fully automatic\u003c\/li\u003e\n\u003cli\u003eBattery maintenance mode\u003c\/li\u003e\n\u003cli\u003eTwo-year warranty\u003c\/li\u003e\n\u003cli\u003eDC charge cables = 5ft and AC power cord = 3ft\u003c\/li\u003e\n\u003cli\u003eApproved and meets ISO 8846 marine standards\u003c\/li\u003e\n\u003cli\u003eLED lights indicate \"Each Battery’s\" state of charge\u003c\/li\u003e\n\u003cli\u003eReverse polarity protection and no installation restrictions\u003c\/li\u003e\n\u003cli\u003eIgnition protected (US Coast Guard 33 CFR 183.410)\u003c\/li\u003e\n\u003cli\u003eFCC 15 Parts A and B Interference Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMay Be Used in Many Types of Sporting applications, Including:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBass Boats\u003c\/li\u003e\n\u003cli\u003eRunabouts\u003c\/li\u003e\n\u003cli\u003ePontoons\u003c\/li\u003e\n\u003cli\u003eAutomobiles\u003c\/li\u003e\n\u003cli\u003eATVs\u003c\/li\u003e\n\u003cli\u003eGolf Carts\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Dual Pro","offers":[{"title":"Default Title","offer_id":46488257003590,"sku":"GCO-100629","price":414.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/100629XL.jpg?v=1789728494"},{"product_id":"xantrex-truecharge-trade-3-20a-3-bank-battery-charger-12v","title":"Xantrex TRUEcharge\u0026trade;3 20A 3 Bank Battery Charger - 12V","description":"\u003cp\u003e\u003cstrong\u003eTRUEcharge™3 20A 3 Bank Battery Charger - 12V\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, they feature low electrical interference and efficient power factor-corrected multistage charging. The TRUEcharge3 Chargers can be mounted in multiple positions thanks to their inherent drip-proof design characteristics. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.\u003c\/p\u003e\u003cp\u003eDesigned for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 12 V models can be enhanced with an optional remote panel. Each model has built-in protection against surges and spikes on the AC power line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMicroprocessor-controlled, multistage charging algorithms\u003c\/li\u003e\n\u003cli\u003eSettings for two and three-stage charging\u003c\/li\u003e\n\u003cli\u003eBattery-equalization feature\u003c\/li\u003e\n\u003cli\u003eSettings for flooded, gel, AGM, or lithium-ion batteries\u003c\/li\u003e\n\u003cli\u003eEquipped with parallel stacking (remote panel required)\u003c\/li\u003e\n\u003cli\u003eAbility to charge batteries drained to extremely low voltage\u003c\/li\u003e\n\u003cli\u003eAdded quiet mode\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProtection Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReverse-battery polarity protection\u003c\/li\u003e\n\u003cli\u003eDrip-proof design\u003c\/li\u003e\n\u003cli\u003eDC over-voltage protection\u003c\/li\u003e\n\u003cli\u003eOver-temperature protection\u003c\/li\u003e\n\u003cli\u003eCircuit breaker protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThree-Stage Charging\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate\u003c\/li\u003e\n\u003cli\u003eAbsorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate\u003c\/li\u003e\n\u003cli\u003eFloat: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Factor Corrected (PFC) Charging\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElectrical Specifications (@ 25 degrees C unless otherwise noted):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutput Current (nominal): 20 A \u003c\/li\u003e\n\u003cli\u003eOutput Voltage (nominal, depending on settings): Charge 14.2–15.5; Float 13.4–13.8 Vdc; 16 V\u003c\/li\u003e\n\u003cli\u003eDC Output Connections: Three\u003c\/li\u003e\n\u003cli\u003eAC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal\u003c\/li\u003e\n\u003cli\u003eTemperature Compensation: Three settings \u003c\/li\u003e\n\u003cli\u003eCharger Efficiency: \u0026gt; 80%\u003c\/li\u003e\n\u003cli\u003eBattery Type: Gel, Flooded, AGM, LiFePO4 \u003c\/li\u003e\n\u003cli\u003eMinimum Recommended Battery Bank Size: 40 Ah\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eGeneral Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating Temperature Range: 0–60°C (32–140°F) \u003c\/li\u003e\n\u003cli\u003eStorage Temperature -40–80°C (-40–176°F)\u003c\/li\u003e\n\u003cli\u003eBattery Connection: Three positive terminals and one negative terminal\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x L): 70 x 170 x 250 mm (2.8 x 6.7 x 9.8”)\u003c\/li\u003e\n\u003cli\u003eWeight 2.2 kg (4.8 lb) \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRegulatory Approvals \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeets CSA 60335-2-29, CE Marked for the Low Voltage Directive (safety) and the EMC Directive, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE\/CEC energy efficiency compliant.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Xantrex","offers":[{"title":"Default Title","offer_id":46488281514054,"sku":"GCO-101670","price":522.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/101670XL_79ca8781-658a-48bb-8213-679afcd5cccc.jpg?v=1788870783"},{"product_id":"xantrex-truecharge-trade-3-40a-3-bank-battery-charger-12v","title":"Xantrex TRUEcharge\u0026trade;3 40A 3 Bank Battery Charger - 12V","description":"\u003cp\u003e\u003cstrong\u003eTRUEcharge™3 40A 3 Bank Battery Charger - 12V\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, they feature low electrical interference and efficient power factor-corrected multistage charging. The TRUEcharge3 Chargers can be mounted in multiple positions thanks to their inherent drip-proof design characteristics. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.\u003c\/p\u003e\u003cp\u003eDesigned for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 12 V models can be enhanced with an optional remote panel. Each model has built-in protection against surges and spikes on the AC power line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMicroprocessor-controlled, multistage charging algorithms\u003c\/li\u003e\n\u003cli\u003eSettings for two and three-stage charging\u003c\/li\u003e\n\u003cli\u003eBattery-equalization feature\u003c\/li\u003e\n\u003cli\u003eSettings for flooded, gel, AGM, or lithium-ion batteries\u003c\/li\u003e\n\u003cli\u003eEquipped with parallel stacking (remote panel required)\u003c\/li\u003e\n\u003cli\u003eAbility to charge batteries drained to extremely low voltage\u003c\/li\u003e\n\u003cli\u003eAdded quiet mode\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProtection Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReverse-battery polarity protection\u003c\/li\u003e\n\u003cli\u003eDrip-proof design\u003c\/li\u003e\n\u003cli\u003eDC over-voltage protection\u003c\/li\u003e\n\u003cli\u003eOver-temperature protection\u003c\/li\u003e\n\u003cli\u003eCircuit breaker protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThree-Stage Charging\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate\u003c\/li\u003e\n\u003cli\u003eAbsorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate\u003c\/li\u003e\n\u003cli\u003eFloat: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Factor Corrected (PFC) Charging\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElectrical Specifications (@ 25 degrees C unless otherwise noted):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutput Current (nominal): 40 A \u003c\/li\u003e\n\u003cli\u003eOutput Voltage (nominal, depending on settings): Charge 14.2–15.5; Float 13.4–13.8 Vdc; 16 V\u003c\/li\u003e\n\u003cli\u003eDC Output Connections: Three\u003c\/li\u003e\n\u003cli\u003eAC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal\u003c\/li\u003e\n\u003cli\u003eTemperature Compensation: Three settings \u003c\/li\u003e\n\u003cli\u003eCharger Efficiency: \u0026gt; 80%\u003c\/li\u003e\n\u003cli\u003eBattery Type: Gel, Flooded, AGM, LiFePO4 \u003c\/li\u003e\n\u003cli\u003eMinimum Recommended Battery Bank Size: 80 Ah\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eGeneral Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating Temperature Range: 0–60°C (32–140°F) \u003c\/li\u003e\n\u003cli\u003eStorage Temperature -40–80°C (-40–176°F)\u003c\/li\u003e\n\u003cli\u003eBattery Connection: Three positive terminals and one negative terminal\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x L): 70 x 170 x 250 mm (2.8 x 6.7 x 9.8”)\u003c\/li\u003e\n\u003cli\u003eWeight 2.2 kg (4.8 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRegulatory Approvals \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeets CSA 60335-2-29, CE Marked for the Low Voltage Directive (safety) and the EMC Directive, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE\/CEC energy efficiency compliant.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Xantrex","offers":[{"title":"Default Title","offer_id":46488281546822,"sku":"GCO-101671","price":669.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/101671XL_eae97838-27fe-40fc-b699-f6bd75226706.jpg?v=1790123772"},{"product_id":"xantrex-truecharge-trade-3-60a-3-bank-battery-charger-12v","title":"Xantrex TRUEcharge\u0026trade;3 60A 3 Bank Battery Charger - 12V","description":"\u003cp\u003e\u003cstrong\u003eTRUEcharge™3 60A 3 Bank Battery Charger - 12V\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, they feature low electrical interference and efficient power factor-corrected multistage charging. The TRUEcharge3 Chargers can be mounted in multiple positions thanks to their inherent drip-proof design characteristics. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.\u003c\/p\u003e\u003cp\u003eDesigned for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 12 V models can be enhanced with an optional remote panel. Each model has built-in protection against surges and spikes on the AC power line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMicroprocessor-controlled, multistage charging algorithms\u003c\/li\u003e\n\u003cli\u003eSettings for two and three-stage charging\u003c\/li\u003e\n\u003cli\u003eBattery-equalization feature\u003c\/li\u003e\n\u003cli\u003eSettings for flooded, gel, AGM, or lithium-ion batteries\u003c\/li\u003e\n\u003cli\u003eEquipped with parallel stacking (remote panel required)\u003c\/li\u003e\n\u003cli\u003eAbility to charge batteries drained to extremely low voltage\u003c\/li\u003e\n\u003cli\u003eAdded quiet mode\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProtection Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReverse-battery polarity protection\u003c\/li\u003e\n\u003cli\u003eDrip-proof design\u003c\/li\u003e\n\u003cli\u003eDC over-voltage protection\u003c\/li\u003e\n\u003cli\u003eOver-temperature protection\u003c\/li\u003e\n\u003cli\u003eCircuit breaker protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThree-Stage Charging\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate\u003c\/li\u003e\n\u003cli\u003eAbsorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate\u003c\/li\u003e\n\u003cli\u003eFloat: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Factor Corrected (PFC) Charging\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElectrical Specifications (@ 25 degrees C unless otherwise noted):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutput Current (nominal): 60 A \u003c\/li\u003e\n\u003cli\u003eOutput Voltage (nominal, depending on settings): Charge 14.2–15.5; Float 13.4–13.8 Vdc; 16 V\u003c\/li\u003e\n\u003cli\u003eDC Output Connections: Three\u003c\/li\u003e\n\u003cli\u003eAC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal\u003c\/li\u003e\n\u003cli\u003eTemperature Compensation: Three settings \u003c\/li\u003e\n\u003cli\u003eCharger Efficiency: \u0026gt; 80%\u003c\/li\u003e\n\u003cli\u003eBattery Type: Gel, Flooded, AGM, LiFePO4 \u003c\/li\u003e\n\u003cli\u003eMinimum Recommended Battery Bank Size: 120 Ah \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eGeneral Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating Temperature Range: 0–60°C (32–140°F) \u003c\/li\u003e\n\u003cli\u003eStorage Temperature -40–80°C (-40–176°F)\u003c\/li\u003e\n\u003cli\u003eBattery Connection: Three positive terminals and one negative terminal\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x L): 90 x 170 x 340 mm (3.5 x 6.7 x 13.4”)\u003c\/li\u003e\n\u003cli\u003eWeight 4.5 kg (9.9 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRegulatory Approvals \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeets CSA 60335-2-29, CE Marked for the Low Voltage Directive (safety) and the EMC Directive, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE\/CEC energy efficiency compliant.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Xantrex","offers":[{"title":"Default Title","offer_id":46488281579590,"sku":"GCO-101672","price":1160.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/101672XL_2d515955-4dc7-4671-9922-187a8a206884.jpg?v=1789961366"},{"product_id":"xantrex-truecharge-trade-3-10a-3-bank-battery-charger-24v","title":"Xantrex TRUEcharge\u0026trade;3 10A 3 Bank Battery Charger - 24V","description":"\u003cp\u003e\u003cstrong\u003eTRUEcharge™3 10A 3 Bank Battery Charger - 24V\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, they feature low electrical interference and efficient power factor-corrected multistage charging. The TRUEcharge3 Chargers can be mounted in multiple positions thanks to their inherent drip-proof design characteristics. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.\u003c\/p\u003e\u003cp\u003eDesigned for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 24 V models can be enhanced with an optional remote panel. Each model has built-in protection against surges and spikes on the AC power line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMicroprocessor-controlled, multistage charging algorithms\u003c\/li\u003e\n\u003cli\u003eSettings for two and three-stage charging\u003c\/li\u003e\n\u003cli\u003eBattery-equalization feature\u003c\/li\u003e\n\u003cli\u003eSettings for flooded, gel, AGM, or lithium-ion batteries\u003c\/li\u003e\n\u003cli\u003eEquipped with parallel stacking (remote panel required)\u003c\/li\u003e\n\u003cli\u003eAbility to charge batteries drained to extremely low voltage\u003c\/li\u003e\n\u003cli\u003eAdded quiet mode\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProtection Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReverse-battery polarity protection\u003c\/li\u003e\n\u003cli\u003eDrip-proof design\u003c\/li\u003e\n\u003cli\u003eDC over-voltage protection\u003c\/li\u003e\n\u003cli\u003eOver-temperature protection\u003c\/li\u003e\n\u003cli\u003eCircuit breaker protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThree-Stage Charging\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate\u003c\/li\u003e\n\u003cli\u003eAbsorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate\u003c\/li\u003e\n\u003cli\u003eFloat: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Factor Corrected (PFC) Charging\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElectrical Specifications (@ 25 degrees C unless otherwise noted):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutput Current (nominal): 10 A \u003c\/li\u003e\n\u003cli\u003eOutput Voltage (nominal, depending on settings): Charge 28.4–31.0 Vdc; Float 26.8–27.6 Vdc; 32 Vdc\u003c\/li\u003e\n\u003cli\u003eDC Output Connections: Three\u003c\/li\u003e\n\u003cli\u003eAC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal\u003c\/li\u003e\n\u003cli\u003eTemperature Compensation: Three settings \u003c\/li\u003e\n\u003cli\u003eCharger Efficiency: \u0026gt; 80%\u003c\/li\u003e\n\u003cli\u003eBattery Type: Gel, Flooded, AGM, LiFePO4 \u003c\/li\u003e\n\u003cli\u003eMinimum Recommended Battery Bank Size: 20 Ah\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eGeneral Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating Temperature Range: 0–60°C (32–140°F) \u003c\/li\u003e\n\u003cli\u003eStorage Temperature -40–80°C (-40–176°F)\u003c\/li\u003e\n\u003cli\u003eBattery Connection: Three positive terminals and one negative terminal\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x L): 70 x 170 x 250 mm (2.8 x 6.7 x 9.8”)\u003c\/li\u003e\n\u003cli\u003eWeight 2.2 kg (4.8 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRegulatory Approvals \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeets CSA 60335-2-29, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE\/CEC energy efficiency compliant.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Xantrex","offers":[{"title":"Default Title","offer_id":46488281677894,"sku":"GCO-101673","price":616.78,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/101673XL.jpg?v=1789729786"},{"product_id":"xantrex-truecharge-trade-3-20a-3-bank-battery-charger-24v","title":"Xantrex TRUEcharge\u0026trade;3 20A 3 Bank Battery Charger - 24V","description":"\u003cp\u003e\u003cstrong\u003eTRUEcharge™3 20A 3 Bank Battery Charger - 24V\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, they feature low electrical interference and efficient power factor-corrected multistage charging. The TRUEcharge3 Chargers can be mounted in multiple positions thanks to their inherent drip-proof design characteristics. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.\u003c\/p\u003e\u003cp\u003eDesigned for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 24 V models can be enhanced with an optional remote panel. Each model has built-in protection against surges and spikes on the AC power line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMicroprocessor-controlled, multistage charging algorithms\u003c\/li\u003e\n\u003cli\u003eSettings for two and three-stage charging\u003c\/li\u003e\n\u003cli\u003eBattery-equalization feature\u003c\/li\u003e\n\u003cli\u003eSettings for flooded, gel, AGM, or lithium-ion batteries\u003c\/li\u003e\n\u003cli\u003eEquipped with parallel stacking (remote panel required)\u003c\/li\u003e\n\u003cli\u003eAbility to charge batteries drained to extremely low voltage\u003c\/li\u003e\n\u003cli\u003eAdded quiet mode\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProtection Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReverse-battery polarity protection\u003c\/li\u003e\n\u003cli\u003eDrip-proof design\u003c\/li\u003e\n\u003cli\u003eDC over-voltage protection\u003c\/li\u003e\n\u003cli\u003eOver-temperature protection\u003c\/li\u003e\n\u003cli\u003eCircuit breaker protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThree-Stage Charging\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate\u003c\/li\u003e\n\u003cli\u003eAbsorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate\u003c\/li\u003e\n\u003cli\u003eFloat: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Factor Corrected (PFC) Charging\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElectrical Specifications (@ 25 degrees C unless otherwise noted):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutput Current (nominal): 20 A \u003c\/li\u003e\n\u003cli\u003eOutput Voltage (nominal, depending on settings): Charge 28.4–31.0 Vdc; Float 26.8–27.6 Vdc; 32 Vdc\u003c\/li\u003e\n\u003cli\u003eDC Output Connections: Three\u003c\/li\u003e\n\u003cli\u003eAC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal\u003c\/li\u003e\n\u003cli\u003eTemperature Compensation: Three settings \u003c\/li\u003e\n\u003cli\u003eCharger Efficiency: \u0026gt; 80%\u003c\/li\u003e\n\u003cli\u003eBattery Type: Gel, Flooded, AGM, LiFePO4 \u003c\/li\u003e\n\u003cli\u003eMinimum Recommended Battery Bank Size: 40 Ah \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eGeneral Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating Temperature Range: 0–60°C (32–140°F) \u003c\/li\u003e\n\u003cli\u003eStorage Temperature -40–80°C (-40–176°F)\u003c\/li\u003e\n\u003cli\u003eBattery Connection: Three positive terminals and one negative terminal\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x L): 70 x 170 x 250 mm (2.8 x 6.7 x 9.8”)\u003c\/li\u003e\n\u003cli\u003eWeight 2.2 kg (4.8 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRegulatory Approvals \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeets CSA 60335-2-29, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE\/CEC energy efficiency compliant.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Xantrex","offers":[{"title":"Default Title","offer_id":46488281710662,"sku":"GCO-101674","price":784.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/101674XL_100096b1-d8ea-427f-b061-0312fef6f14e.jpg?v=1788870813"},{"product_id":"xantrex-truecharge-trade-3-30a-3-bank-battery-charger-24v","title":"Xantrex TRUECHARGE\u0026trade;3 30A 3 Bank Battery Charger - 24V","description":"\u003cp\u003e\u003cstrong\u003eTRUECHARGE™3 30A 3 Bank Battery Charger - 24V\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, TRUEcharge3 battery chargers feature low electrical interference and efficient power factor-corrected multistage charging. Thanks to their inherent drip-proof design characteristics, the TRUEcharge3 Chargers can be mounted in multiple positions. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.\u003c\/p\u003e\u003cp\u003eDesigned for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 24 V models can be enhanced with an optional remote panel. Each model comes with built-in protection against surges and spikes on the AC power line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMicroprocessor-controlled, multistage charging algorithms\u003c\/li\u003e\n\u003cli\u003eSettings for two and three-stage charging\u003c\/li\u003e\n\u003cli\u003eBattery-equalization feature\u003c\/li\u003e\n\u003cli\u003eSettings for flooded, gel, AGM, or lithium-ion batteries\u003c\/li\u003e\n\u003cli\u003eEquipped with parallel stacking (remote panel required)\u003c\/li\u003e\n\u003cli\u003eAbility to charge batteries drained to extremely low voltage\u003c\/li\u003e\n\u003cli\u003eAdded quiet mode\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProtection Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReverse-battery polarity protection\u003c\/li\u003e\n\u003cli\u003eDrip-proof design\u003c\/li\u003e\n\u003cli\u003eDC over-voltage protection\u003c\/li\u003e\n\u003cli\u003eOver-temperature protection\u003c\/li\u003e\n\u003cli\u003eCircuit breaker protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThree-Stage Charging\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate\u003c\/li\u003e\n\u003cli\u003eAbsorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate\u003c\/li\u003e\n\u003cli\u003eFloat: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Factor Corrected (PFC) Charging\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElectrical Specifications (@ 25 degrees C unless otherwise noted):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutput Current (nominal): 30 A \u003c\/li\u003e\n\u003cli\u003eOutput Voltage (nominal, depending on settings): Charge 28.4–31.0 Vdc; Float 26.8–27.6 Vdc; 32 V\u003c\/li\u003e\n\u003cli\u003eDC Output Connections: Three\u003c\/li\u003e\n\u003cli\u003eAC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal\u003c\/li\u003e\n\u003cli\u003eTemperature Compensation: Three settings \u003c\/li\u003e\n\u003cli\u003eCharger Efficiency: \u0026gt; 80%\u003c\/li\u003e\n\u003cli\u003eBattery Type: Gel, Flooded, AGM, LiFePO4 \u003c\/li\u003e\n\u003cli\u003eMinimum Recommended Battery Bank Size: 60 Ah\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eGeneral Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating Temperature Range: 0–60°C (32–140°F) \u003c\/li\u003e\n\u003cli\u003eStorage Temperature -40–80°C (-40–176°F)\u003c\/li\u003e\n\u003cli\u003eBattery Connection: Three positive terminals and one negative terminal\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x L): 90 x 170 x 340 mm (3.5 x 6.7 x 13.4”)\u003c\/li\u003e\n\u003cli\u003eWeight 4.5 kg (9.9 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e Regulatory Approvals \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeets CSA 60335-2-29, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE\/CEC energy efficiency compliant.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Xantrex","offers":[{"title":"Default Title","offer_id":46488281743430,"sku":"GCO-101675","price":1139.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/101675XL_5ceb40b1-a358-4164-9fb5-b648caefb7b9.jpg?v=1790123769"},{"product_id":"victron-magcode-power-clip-f-blue-smart-ip65-charger-12v-15-amp-max-requires-power-port","title":"Victron MagCode Power Clip f\/Blue Smart IP65 Charger - 12V - 15 Amp Max (Requires Power Port)","description":"\u003cp\u003e\u003cstrong\u003eMagCode Power Clip for Blue Smart IP65 Charger - 12V - 15 Amp Max (Requires Power Port)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMagCode Power Clip is a connection cable for the Victon's Blue Smart IP65 Chargers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12V\u003c\/li\u003e\n\u003cli\u003e15 amp max\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Requires Victon’s MagCode Power Port\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":46488296390726,"sku":"GCO-101851","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/101851XL.jpg?v=1790091431"},{"product_id":"victron-magcode-power-port-f-blue-smart-ip65-charger-12v-15-amp-max-requires-power-clip","title":"Victron MagCode Power Port f\/Blue Smart IP65 Charger - 12V - 15 Amp Max (Requires Power Clip)","description":"\u003cp\u003e\u003cstrong\u003eMagCode Power Port for Blue Smart IP65 Charger - 12V - 15 Amp Max (Requires Power Clip)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMagCode Power Port is a magnetic connector for Victon's Blue Smart IP65 Chargers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVolt: 12V\u003c\/li\u003e\n\u003cli\u003eMax Amp: 15\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Requires Victon’s MagCode Power Clip\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":46488296456262,"sku":"GCO-101852","price":46.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/101852XL_b858c4bf-594d-4295-9ef2-4ef56d312ada.jpg?v=1788871285"},{"product_id":"victron-blue-smart-ip65-charger-6v-12v-1-1a-120v-1-15","title":"Victron Blue Smart IP65 Charger - 6V\/12V - 1.1A - 120V - 1-15","description":"\u003cp\u003e\u003cstrong\u003eBlue Smart IP65 Charger - 6V\/12V - 1.1A - 120V - 1-15P\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in the workshop and motor vehicles, such as (classic) cars; motorbikes; boats, and camper vans. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe battery is charged, smartly... to the perfect condition\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seven-step charging algorithm gets the best out of a battery. The charger gives the battery the power it needs, maintains its health, and ensures better performance... and longer life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRecovery of deeply-discharged 'dead' batteries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Regular charging will then be resumed as soon as sufficient voltage is across the battery terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConnect the battery with ease\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe charger comes with both crocodile clips and M8 eyelets - making it easy to connect to the battery. If users wish, it can be left permanently connected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the status of your battery remotely\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet, or laptop. All settings of the charger can be configured with the VictronConnect app.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage \u0026amp; Frequency Range: 100 - 250VAC | 45 - 65Hz \u003c\/li\u003e\n\u003cli\u003eEfficiency: 82%\u003c\/li\u003e\n\u003cli\u003eStandby Power Consumption: \u0026lt;0,5 W \u003c\/li\u003e\n\u003cli\u003eMinimum Battery Voltage: Starts charging from down to 0 V\u003c\/li\u003e\n\u003cli\u003eCharge voltage 'absorption': Normal: 7,2 V | 14,4 V \/ High: 7,35 V | 14,7 V \/ Li-ion: 7,1 V | 14,2 V\u003c\/li\u003e\n\u003cli\u003eCharge Voltage 'float': Normal: 6,9 V | 13,8 V \/ High: 6,9 V | 13,8 V \/ Li-ion: Disabled\u003c\/li\u003e\n\u003cli\u003eCharge Voltage 'storage': Normal: 6,6 V | 13,2 V \/ High: 6,6 V | 13,2 V \/ Li-ion: 6,75 V | 13,5 V\u003c\/li\u003e\n\u003cli\u003eCharge Current: 1.1 A \u003c\/li\u003e\n\u003cli\u003eLow-Current Mode: 0,5A \u003c\/li\u003e\n\u003cli\u003eTemperature Compensation (lead-acid batteries only): 8 mV\/°C | 16 mV\/°C \u003c\/li\u003e\n\u003cli\u003ePower Supply Mode: Yes\u003c\/li\u003e\n\u003cli\u003eBack Current Drain: 0,1 Ah\/month (140uA) \u003c\/li\u003e\n\u003cli\u003eProtection: Reverse polarity, Output short circuit, Over-temperature\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Range: -30 to +50°C (full rated output up to 30°C)\u003c\/li\u003e\n\u003cli\u003eHumidity (non-condensing): Max 95%\u003c\/li\u003e\n\u003cli\u003eCharge Algorithm: 7-stage adaptive\u003c\/li\u003e\n\u003cli\u003eBluetooth: 4dBm, 2402–2480 MHz\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery-Connection: Black and red cable of 1,5 meter\u003c\/li\u003e\n\u003cli\u003e230V AC connection: 1.5m cable with CEE 7\/16 or AS\/NZS 3112 plug\u003c\/li\u003e\n\u003cli\u003eProtection Category: IP65 (splash and dust proof)\u003c\/li\u003e\n\u003cli\u003eWeight: 0,4 kg\u003c\/li\u003e\n\u003cli\u003eDimensions: 38 x 64 x 153 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSafety: EN 60335-1, EN 60335-2-29\u003c\/li\u003e\n\u003cli\u003eEmission; EN 55014-1, EN 61000-6-3, EN 61000-3-2\u003c\/li\u003e\n\u003cli\u003eImmunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":46488296489030,"sku":"GCO-101853","price":68.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/101853XL_63cc8ad7-ca64-42de-837e-332fb1ee917b.jpg?v=1788871289"},{"product_id":"promariner-battery-isolator-1-alternator-3-battery-70-amp","title":"ProMariner Battery Isolator - 1 Alternator - 3 Battery - 70 AMP","description":"\u003cp\u003e\u003cstrong\u003eBattery Isolator - 1 Alternator - 3 Battery - 70 AMP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eProMariner Battery Isolators with gold-plated terminals and improved efficiency, provide enhanced charging. Rated for use with DC devices ranging from 10 amps to 70 amps.\u003c\/p\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"ProMariner","offers":[{"title":"Default Title","offer_id":46488448204870,"sku":"GCO-102170","price":198.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102170XL.jpg?v=1789729902"},{"product_id":"victron-bluesmart-ip65-charger-12-25-1-120v-nema-1-15","title":"Victron BlueSmart IP65 Charger 12\/25 (1) 120V NEMA 1-15","description":"\u003cp\u003e\u003cstrong\u003eBlueSmart IP65 Charger 12\/25 (1) 120V NEMA 1-15P UL Approved\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in the workshop and on motor vehicles, such as classic cars, motorbikes, boats, and campervans. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Battery Is Charged, Smartly... To Perfect Condition\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seven-step charging algorithm gets the most out of a battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and gives it a longer life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRecovery of Deeply-Discharged ‘Dead’ Batteries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConnect the Battery with Ease\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe charger comes with both crocodile clips and M8 eyelets, making it easy to connect to the battery. If users wish, they can leave it permanently connected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the Status of the Battery Remotely\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet, or laptop. All settings of the charger can be configured with the VictronConnect app.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 120 VAC\u003c\/li\u003e\n\u003cli\u003eEfficiency: 94%\u003c\/li\u003e\n\u003cli\u003eStandby Power Consumption: 0.5W \u003c\/li\u003e\n\u003cli\u003eMinimum Battery Voltage: Starts charging from down to 0V\u003c\/li\u003e\n\u003cli\u003eCharge Voltage 'Absorption': Normal: 14.4V High: 14.7V Li-ion: 12.4V\u003c\/li\u003e\n\u003cli\u003eCharge Voltage 'Float': Normal: 13.8V High: 13.8V Li-ion: 13.5V \u003c\/li\u003e\n\u003cli\u003eCharge Voltage 'Storage': Normal: 13.2V High: 13.2V Li-ion: 13.5V \u003c\/li\u003e\n\u003cli\u003eCharge Current: 25A\u003c\/li\u003e\n\u003cli\u003eTemperature Compensation (Lead-Acid Batteries Only): 16 mV\/degrees C (18mV\/degrees F\u003c\/li\u003e\n\u003cli\u003eCan Be Used as Power Supply: Yes\u003c\/li\u003e\n\u003cli\u003eBack Curreny Drain: 0.7Ah\/month  (1mA) \u003c\/li\u003e\n\u003cli\u003eProtection: Reverse polarity; Output short circuit; Over temperature \u003c\/li\u003e\n\u003cli\u003eOperating Temp. Range: -40 to +60 degrees C (full rated output up to 30 degrees C) -40  to +140 degrees F (full rated output up to 90 degrees F) \u003c\/li\u003e\n\u003cli\u003eHumidity (non-condensing): Max 95%\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery-Connection: Black and red cable of 1.5 meters (4.9 feet)\u003c\/li\u003e\n\u003cli\u003e120 V Ac-Connection: Cable of 1.8 meters (5.9 feet) with US NEMA 1-15 plug\u003c\/li\u003e\n\u003cli\u003eProtection Category: IP65 (splash and dust proof, and ignition protected)\u003c\/li\u003e\n\u003cli\u003eWeight: 0,9kg (2lbs)\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D): 12\/25: 60 x 105 x190mm 2.3 x 4.1x 7.5 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSafety: UL 1236, CSA C22.2, EN 60335-1, 60335-2-29\u003c\/li\u003e\n\u003cli\u003eEmission: EN 55014-1, EN 61000-6-3, EN 61000-3-2\u003c\/li\u003e\n\u003cli\u003eImmunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":46488448499782,"sku":"GCO-102194","price":274.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102194XL_acd0e178-21f7-4919-a73a-b0a523c6bbba.jpg?v=1789766577"},{"product_id":"newmar-pt-7-battery-charger","title":"Newmar PT-7 Battery Charger","description":"\u003cp\u003e\u003cstrong\u003ePT-7 Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNewmar’s Phase Three Series Battery Chargers employ “Smart” battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. This model is housed in a rugged stainless-steel case with a durable white powder coat finish, and the internal circuitry is polyurethane-coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts output voltage based on battery temperature. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eCurrent limiting prevents damage from overloading\u003c\/li\u003e\n\u003cli\u003eClean well-regulated output can be used as a power supply; can power loads directly without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless-steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 88-132 or 176-264 \u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC 2, @ 230 VAC 1    \u003c\/li\u003e\n\u003cli\u003eP.F. Rating: \u0026gt;.65 \u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 7\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 2 \u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 14-70\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-1\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-1\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 10.5 x 5.0 x 2.8 inches (26.7 x 12.7 x 7.1 centimeters)\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 3.2\/1.5\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: N\/A\u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: N\/A \u003c\/li\u003e\n\u003cli\u003eEqualize Option: No\u003c\/li\u003e\n\u003cli\u003eOutput Indicator Reference: M-1\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: CG, CE    \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -10 degrees C to +45 degrees C    \u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 0 degrees C to 80% @ -10 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meet SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46488454004806,"sku":"GCO-102326","price":472.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102326XL.jpg?v=1789729985"},{"product_id":"newmar-pt-14w-battery-charger","title":"Newmar PT-14W Battery Charger","description":"\u003cp\u003e\u003cstrong\u003ePT-14W Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNewmar’s Phase Three Series Battery Chargers employ “Smart” battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. This model is housed in a rugged stainless-steel case with a durable white powder coat finish, and the internal circuitry is polyurethane-coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts output voltage based on battery temperature. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eCurrent limiting prevents damage from overloading\u003c\/li\u003e\n\u003cli\u003eClean well-regulated output can be used as a power supply; can power loads directly without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless-steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 85-264    \u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 2.8, @ 230 VAC: 1.4 \u003c\/li\u003e\n\u003cli\u003eP.F. Rating: .93@230V and .98@115V\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 14\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 28-140    \u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-2\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-2\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 11.2A x 7.7 x 4.75A inches (31.8A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 8\/4\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24    \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: RP\u003c\/li\u003e\n\u003cli\u003eEqualize Option: Yes\u003c\/li\u003e\n\u003cli\u003eOutput Indicator Reference: M-3\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: CG, CE    \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -10 degrees C to +60 degrees C    \u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 40 degrees C to 60% @ 60 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRemote Panel, model RP, for use with all models except PT-7 and PT-40U (LEDs indicate the charger output stage. Manual re-initialization of a three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)\u003c\/li\u003e\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46488454070342,"sku":"GCO-102327","price":943.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102327XL.jpg?v=1789729983"},{"product_id":"newmar-pt-24-13w-battery-charger","title":"Newmar PT-24-13W Battery Charger","description":"\u003cp\u003e\u003cstrong\u003ePT-24-13W Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24-volt model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts output voltage based on battery temperature\u003c\/li\u003e\n\u003cli\u003eCurrent limiting prevents damage from overloading\u003c\/li\u003e\n\u003cli\u003eUse as a power supply; can power loads without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eInstall in conjunction with PT-MCU for additional control and monitoring\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 90 – 132, 180 – 264\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 6.5, @ 230 VAC: 4 \u003c\/li\u003e\n\u003cli\u003ePower Factor: .7\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 13\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 26 – 130\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-2\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-1\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 11.2A x 7.7 x 4.75A inches (28.4A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 8\/4\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24    \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: RP\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: CG, ABS \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -10 degrees C to +60 degrees C    \u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 50 degrees C to 60% @ 60 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUL: UL 1950 (per DNB report)\u003c\/li\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eEN: EN 60335-1\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRemote Panel, model RP, for use with all models except PT-24-20U, PT-24-60, and PT-32-25 (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)\u003c\/li\u003e\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46488454201414,"sku":"GCO-102328","price":1073.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102328XL_3f1014e9-40c6-4e8b-afb9-7b8f0c20160a.jpg?v=1788872984"},{"product_id":"newmar-pt-24-20u-battery-charger","title":"Newmar PT-24-20U Battery Charger","description":"\u003cp\u003e\u003cstrong\u003ePT-24-20U Battery Charge\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24-volt model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, float\u003c\/li\u003e\n\u003cli\u003eGel-cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts output voltage based on battery temperature\u003c\/li\u003e\n\u003cli\u003eCurrent limiting prevents damage from overloading\u003c\/li\u003e\n\u003cli\u003eUse as a power supply; can power loads without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eInstall in conjunction with PT-MCU for additional control and monitoring\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 85 – 135, 170 – 270\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 6.8, @ 230 VAC: 4.3 \u003c\/li\u003e\n\u003cli\u003ePower Factor: .7\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 20\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 40– 200\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-3\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-2\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 13.85B x 9.5 x 4.8B inches (35.2B x 24.1 x 12.2B centimeters) *Note with Dripshield installed B add .75” (1.9 cm) to height and 1.35” (3.4 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 12\/6\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24    \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: NA\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: CG, ABS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -20 degrees C to +60 degrees C    \u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 50 degrees C to 60% @ 60 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUL: UL 1950 (per DNB report)\u003c\/li\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eEN: EN 60335-1\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46488454332486,"sku":"GCO-102329","price":1657.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102329XL_b62368e8-a8a0-4b64-97c2-d2dd21d703b4.jpg?v=1789766593"},{"product_id":"newmar-pt-24-45u-battery-charger","title":"Newmar PT-24-45U Battery Charger","description":"\u003cp\u003e\u003cstrong\u003ePT-24-45U Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24-volt model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts output voltage based on battery temperature\u003c\/li\u003e\n\u003cli\u003eCurrent limiting prevents damage from overloading\u003c\/li\u003e\n\u003cli\u003eUse as a power supply; can power loads without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eInstall in conjunction with PT-MCU for additional control and monitoring\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 90 – 264\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 12, @ 230 VAC: 7 \u003c\/li\u003e\n\u003cli\u003ePower Factor: .98@115V and .95@230V\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 45\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 90 – 450\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-5\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-4\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 14.8B x 9.6 x 5.6D inches (37.6D x 24.4 x 14.2D centimeters) *Note with Dripshield installed D add 1” (2.54 cm) to height and .5” (1.2 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 12\/6\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24    \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: RP\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: EN, CE, ABS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -20 degrees C to +70 degrees C    \u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 50 degrees C to 50% @ 70 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUL: UL 1950 (per DNB report)\u003c\/li\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eEN: EN 60335-1\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRemote Panel, model RP, for use with all models except PT-24-20U, PT-24-60, and PT-32-25 (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)\u003c\/li\u003e\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46488454398022,"sku":"GCO-102330","price":2712.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102330XL.jpg?v=1789729988"},{"product_id":"newmar-pt-24-60w-battery-charger","title":"Newmar PT-24-60W Battery Charger","description":"\u003cp\u003e\u003cstrong\u003ePT-24-60W Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e“Smart” marine battery charging technology for 24V systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24V model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, float\u003c\/li\u003e\n\u003cli\u003eGel-cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts output voltage based on battery temperature\u003c\/li\u003e\n\u003cli\u003eCurrent limiting prevents damage from overloading\u003c\/li\u003e\n\u003cli\u003eUse as a power supply; can power loads without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eInstall in conjunction with PT-MCU for additional control and monitoring\u003c\/li\u003e\n\u003cli\u003eABS type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 207-253\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: NA, @ 230 VAC: 13\u003c\/li\u003e\n\u003cli\u003ePower Factor: .7\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 60\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 120-600    \u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-4\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-5\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 17.5E x 12 x 7.2E inches (44.5E x 30.5 x 18.3E centimeters) *Note with Dripshield installed E add 2” (5.08 cm) to height and 1” (2.54 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 24.1\/11\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TP    \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: N\/A\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: EN, CE, ABS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -20 degrees C to +50 degrees C    \u003c\/li\u003e\n\u003cli\u003eDerate Linearly From Full output\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUL: UL 1950 (per DNB report)\u003c\/li\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eEN: EN 60335-1\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46488454496326,"sku":"GCO-102331","price":3772.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102331XL.jpg?v=1789729990"},{"product_id":"newmar-pt-24-8w-battery-charger","title":"Newmar PT-24-8W Battery Charger","description":"\u003cp\u003e\u003cstrong\u003ePT-24-8W Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24-volt model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts output voltage based on battery temperature\u003c\/li\u003e\n\u003cli\u003eCurrent limiting prevents damage from overloading\u003c\/li\u003e\n\u003cli\u003eUse as a power supply; can power loads without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eInstall in conjunction with PT-MCU for additional control and monitoring\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 85 – 264\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 2.8, @ 230 VAC: 1.4\u003c\/li\u003e\n\u003cli\u003ePower Factor: .98@115V and .93@230V\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 8\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 16 – 80\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-1\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-1\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 11.2A x 7.7 x 4.75A inches (28.4A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 8\/4\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24        \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: RP\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: CG, CE, ABS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -10 degrees C to +60 degrees C\u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 40 degrees C to 60% @ 60 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUL: UL 1950 (per DNB report)\u003c\/li\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eEN: EN 60335-1\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRemote Panel, model RP, for use with all models except PT-24-20U, PT-24-60, and PT-32-25 (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)\u003c\/li\u003e\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46488454627398,"sku":"GCO-102332","price":1135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102332XL.jpg?v=1789729993"},{"product_id":"newmar-pt-24-95u-battery-charger","title":"Newmar PT-24-95U Battery Charger","description":"\u003cp\u003e\u003cstrong\u003ePT-24-95U Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24-volt model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts output voltage based on battery temperature\u003c\/li\u003e\n\u003cli\u003eCurrent limiting prevents damage from overloading\u003c\/li\u003e\n\u003cli\u003eUse as a power supply; can power loads without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eInstall in conjunction with PT-MCU for additional control and monitoring\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 90-264\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 26, @ 230 VAC: 14\u003c\/li\u003e\n\u003cli\u003ePower Factor: .98@115V and .95@230V\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 95\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 180 – 950\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-5\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-5\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 17.5E x 12 x 7.2E inches (44.5E x 30.5 x 18.3E centimeters) *Note with Dripshield installed E add 2” (5.08 cm) to height and 1” (2.54 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 24.5\/11\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24            \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: RP\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: EN, CE, ABS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -20 degrees C to +70 degrees C\u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 50 degrees C to 50% @ 70 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUL: UL 1950 (per DNB report)\u003c\/li\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eEN: EN 60335-1\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRemote Panel, model RP, for use with all models except PT-24-20U, PT-24-60, and PT-32-25 (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)\u003c\/li\u003e\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46488454660166,"sku":"GCO-102333","price":4243.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102333XL.jpg?v=1789729995"},{"product_id":"newmar-pt-25w-battery-charger","title":"Newmar PT-25W Battery Charger","description":"\u003cp\u003e\u003cstrong\u003ePT-25W Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNewmar’s Phase Three Series Battery Chargers employ “Smart” battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. This model is housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12-volt model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, and float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts the output voltage based on battery temperature. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eCurrent limitations prevent damage from overloading\u003c\/li\u003e\n\u003cli\u003eClean well-regulated output can be used as a power supply; can power loads directly without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish, an optional drip shield, and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 90-132 or 180-264\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 6.5, @ 230 VAC: 4\u003c\/li\u003e\n\u003cli\u003ePower Factor: .7\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 25\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 50-250\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-4\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-2\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 11.2A x 7.7 x 4.75A inches (31.8A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 8.2\/4\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24                \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: RP\u003c\/li\u003e\n\u003cli\u003eEqualize Option: Yes\u003c\/li\u003e\n\u003cli\u003eOutput Indicator Reference: M-3\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: CG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -20 degrees C to +60 degrees C\u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 50 degrees C to 60% @ 60 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemote Panel, model RP, for use with all models except PT-7 and PT-40U (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)\u003c\/li\u003e\n\u003cli\u003eTemperature Compensation Sensor, Model TCS 12\/24, for use with all models except PT 7 (-5 mV per cell degrees C, 25′ cable (40’cable optional)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46488454758470,"sku":"GCO-102334","price":1062.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102334XL.jpg?v=1790026672"},{"product_id":"newmar-pt-40u-battery-charger","title":"Newmar PT-40U Battery Charger","description":"\u003cp\u003e\u003cstrong\u003ePT-40U Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNewmar’s Phase Three Series Battery Chargers employ “Smart” battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. This model is housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12-volt model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, and float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts the output voltage based on battery temperature. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eCurrent limitations prevent damage from overloading\u003c\/li\u003e\n\u003cli\u003eClean well-regulated output can be used as a power supply; can power loads directly without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish, an optional drip shield, and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 90-264\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 6.8, @ 230 VAC: 3.4\u003c\/li\u003e\n\u003cli\u003ePower Factor: .98 @ 115V and .95 @ 230V\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 40\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 80-400    \u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-5\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-3\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 13.85B x 9.5 x 4.8B inches (35.2B x 24.1 x 12.2B centimeters) *Note with Dripshield installed B add .75” (1.9 cm) to height and 1.35” (3.4 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 11\/6\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24                \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: EVM-12-2    \u003c\/li\u003e\n\u003cli\u003eEqualize Option: No\u003c\/li\u003e\n\u003cli\u003eOutput Indicator Reference: M-3\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: CG\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -20 degrees C to +70 degrees C\u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 50 degrees C to 50% @ 70 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meets SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemote Panel, model EVM-12-2, for us with model PT-40 only (Enables monitoring of when the battery charger is “on” and the batteries’ state of readiness, at a glance of two (2) battery banks only)\u003c\/li\u003e\n\u003cli\u003eTemperature Compensation Sensor, Model TCS 12\/24, for use with all models except PT 7 (-5 mV per cell degrees C, 25′ cable (40’cable optional)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46488454922310,"sku":"GCO-102335","price":1727.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102335XL.jpg?v=1789766591"},{"product_id":"newmar-pt-80-battery-charger","title":"Newmar PT-80 Battery Charger","description":"\u003cp\u003e\u003cstrong\u003ePT-80 Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNewmar’s Phase Three Series Battery Chargers employ “Smart” battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.\u003c\/p\u003e\u003cp\u003eA selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. This model is housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12-volt model\u003c\/li\u003e\n\u003cli\u003e“Smart” circuitry provides three-stage charging – bulk, absorption, and float\u003c\/li\u003e\n\u003cli\u003eGel-Cell\/Flooded Lead-acid\/AGM battery type switch selects optimum charge\/float voltages\u003c\/li\u003e\n\u003cli\u003eMultiple isolated output banks; ammeter indicates total output current. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eThe optional sensor adjusts the output voltage based on battery temperature. (Except PT-7)\u003c\/li\u003e\n\u003cli\u003eCurrent limitations prevent damage from overloading\u003c\/li\u003e\n\u003cli\u003eClean well-regulated output can be used as a power supply; can power loads directly without a battery in line\u003c\/li\u003e\n\u003cli\u003eBuilt to last – rugged stainless steel case with a durable white powder coat finish, an optional drip shield, and marinized internal circuitry\u003c\/li\u003e\n\u003cli\u003eProtection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield\u003c\/li\u003e\n\u003cli\u003eABS-type approval for battery charging and power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput VAC (50-60 Hz.): 90-264\u003c\/li\u003e\n\u003cli\u003eInput Amps @ Full Load: @ 115 VAC: 12, @ 230 VAC: 7\u003c\/li\u003e\n\u003cli\u003ePower Factor: .95@230V or .98@115V\u003c\/li\u003e\n\u003cli\u003eMax Output Amps: 80\u003c\/li\u003e\n\u003cli\u003eOutput Banks: 3\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Amp-Hours): 160-800\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Rating Reference: T-7\u003c\/li\u003e\n\u003cli\u003eCase Size Reference: A-5\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 16.8C x 9.6 x 6.1C inches (42.7C x 24.4 x 15.5C centimeters) *Note with Dripshield installed C add 1” (2.54 cm) to height and .5” (1.27 cm) to depth\u003c\/li\u003e\n\u003cli\u003eWeight Lbs.\/Kg: 15.2\/7\u003c\/li\u003e\n\u003cli\u003eOptional Temp. Sensor Model: TCS-12\/24                \u003c\/li\u003e\n\u003cli\u003eRemote Panel Model: RP\u003c\/li\u003e\n\u003cli\u003eEqualize Option: Yes\u003c\/li\u003e\n\u003cli\u003eOutput Indicator Reference: M-3\u003c\/li\u003e\n\u003cli\u003eCompliance Reference: CE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Rating References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTemperature: -10 degrees C to +60 degrees C\u003c\/li\u003e\n\u003cli\u003eDerate Linearly From 100% @ 50 degrees C to 80% @ 60 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNominal Output Voltages at Gel\/Flooded Switch Settings (without Temperature Compensation):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003cli\u003eFlooded\/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompliance References:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCG: USCG CFR 183.410 (Ignition protected)\u003c\/li\u003e\n\u003cli\u003eCE: Carries the CE mark\u003c\/li\u003e\n\u003cli\u003eABS: PT Series meet SVR 2009 4-8-3\/5.9, Under 90 meters Rules 2006 4-6-4\/7.19, and HSNC 2007 4-8-3\/5.13\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemote Panel, model RP, for use with all models except PT-7 and PT-40U (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)\u003c\/li\u003e\n\u003cli\u003eTemperature Compensation Sensor, Model TCS 12\/24, for use with all models except PT 7 (-5 mV per cell degrees C, 25′ cable (40’cable optional)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":46488454955078,"sku":"GCO-102336","price":2865.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102336XL_2b1f14e1-ae99-43f6-affa-f92d90f0c920.jpg?v=1788873025"},{"product_id":"promariner-prosporthd-10-gen-4-10-amp-2-bank-battery-charger","title":"ProMariner ProSportHD 10 Gen 4 - 10 Amp - 2-Bank Battery Charger","description":"\u003cp\u003e\u003cstrong\u003eProSportHD 10 Gen 4 - 10 Amp - 2-Bank Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling while delivering true rated amp output during charge mode. \u003c\/p\u003e\u003cp\u003eProSportHD's enhanced microprocessor and software provide digital features including a fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators, and three digitally selectable performance charge profiles for Flooded (lead acid), AGM, and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. \u003c\/p\u003e\u003cp\u003eFully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real-time installation and battery fault status. \u003c\/p\u003e\u003cp\u003eDesigned for harsh environments with our industrial-grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProMar Digital Technology Microprocessor and software-controlled charging technology for fast, precise charging\u003c\/li\u003e\n\u003cli\u003eDistributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower, and rear-facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode\u003c\/li\u003e\n\u003cli\u003eExpanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four-color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status, and Battery Type indication\u003c\/li\u003e\n\u003cli\u003eLightweight Design Up to 40% lighter compared to an epoxy-filled charger\u003c\/li\u003e\n\u003cli\u003eAuto-Maintain Energy Saver Mode Monitor and auto-maintain batteries only when needed to maintain a full state of charge. This significantly reduces AC power consumption\u003c\/li\u003e\n\u003cli\u003eFully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains, and reconditions batteries once a month during storage periods. Fully charges and extends battery life\u003c\/li\u003e\n\u003cli\u003eBuilt-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B\u003c\/li\u003e\n\u003cli\u003eEasy installation and operation Pre-wired with 6’ AC and DC cables\u003c\/li\u003e\n\u003cli\u003eBattery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries\u003c\/li\u003e\n\u003cli\u003e3 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDC Voltage Systems: 12\/24v\u003c\/li\u003e\n\u003cli\u003eDC Output: Two 12VDC @ 10 amps, fully distributed\u003c\/li\u003e\n\u003cli\u003eCharging\/Maintaining VDC Output: Up to 14.7VDC\/13.8VDC\u003c\/li\u003e\n\u003cli\u003eBattery Types: Flooded (lead acid), AGM, or Gel\u003c\/li\u003e\n\u003cli\u003eAC Input: 120VAC +\/-10%, 50\/60Hz, 3A\u003c\/li\u003e\n\u003cli\u003eAmps: 10\u003c\/li\u003e\n\u003cli\u003eNo. of Batteries: 2\u003c\/li\u003e\n\u003cli\u003eAC \u0026amp; DC Cable Length: 6 ft.\u003c\/li\u003e\n\u003cli\u003eDimensions (inch): 10.5\" x 7.9\" x 2.9\"\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"ProMariner","offers":[{"title":"Default Title","offer_id":46488456298566,"sku":"GCO-102380","price":204.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102380XL.jpg?v=1790026675"},{"product_id":"mastervolt-mac-plus-12-12-50-czone","title":"Mastervolt Mac Plus 12\/12-50 + CZone","description":"\u003cp\u003e\u003cstrong\u003eMac Plus 12\/12-50 + CZone\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoost the Service Battery\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eToo often, service batteries don’t get the charge they need. This is a problem made worse by smart alternators and start\/stop systems, which result in slow and insufficient charges. The Mac Plus DC-DC charger solves this problem, providing a quick, safe, and consistent charge to the service battery. And, by knowing when the engine is running and providing charge, users can be sure that the Mac Plus will never drain a starter battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProven Mastervolt Quality\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUsers get peace of mind knowing that they have the best on board. Using the proven Mastervolt 3-step+ charge algorithm, the Mac Plus delivers a quick and easy charge, even for completely flat batteries.\u003c\/p\u003e\u003cp\u003eA robust design holds up in even the harshest conditions, with battery temperature-optimized charging and a high-quality aluminum housing to ensure superior protection against dust and water ingress. The power-efficient design also allows the Mac Plus to operate silently and without a fan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTotal Power Flexibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith a wide DC input range, the Mac Plus allows for all DC sources and can charge two batteries from a single alternator or charger. It supports a full range of chemistries and battery types, including lithium. It also functions seamlessly with modern alternators such as Euro 5 and 6, ensuring proper charging by providing constant power, even when the alternator is inactive.\u003c\/p\u003e\u003cp\u003eParallel configuration of up to ten units will provide over 100 amperes. Advanced high-frequency technology with modern microprocessors ensures minimal power loss when switching from 12V to 24V and vice versa.\u003c\/p\u003e\u003cp\u003eAnalog voltage sense ports are also available to compensate for voltage drops and maintain proper charging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuperior Monitoring \u0026amp; Control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCompatibility with CZone®, NMEA 2000®, and MasterBus delivers truly superior monitoring and control and ensures Mac Plus integrates easily into complete systems. Achieve the best performance possible via various controllers and high-quality MOSFETs. And configure the Mac Plus with ease via MasterAdjust, the CZone configuration tool, or even via the on-board DIP switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast and safe charging, even during short trips\u003c\/li\u003e\n\u003cli\u003eFanless design for silent operation\u003c\/li\u003e\n\u003cli\u003eSuitable for flooded, Gel, AGM, and Li-Ion batteries (incl. LiFePO4)\u003c\/li\u003e\n\u003cli\u003eEven charges fully depleted batteries\u003c\/li\u003e\n\u003cli\u003eEngine run detection protects the starter battery\u003c\/li\u003e\n\u003cli\u003eAdjustable current limits to meet Euro 5\/6 requirements\u003c\/li\u003e\n\u003cli\u003eVoltage stabilization protects sensitive equipment, lights, and loads\u003c\/li\u003e\n\u003cli\u003eParallel operation to obtain charging capacities well over 100 Amps\u003c\/li\u003e\n\u003cli\u003eMasterBus, CZone, and NMEA 2000 are compatible for intelligent system monitoring and automation\u003c\/li\u003e\n\u003cli\u003eTemperature compensation and voltage sense for an optimal charging result\u003c\/li\u003e\n\u003cli\u003eE-Mark\/R10 certification for mobile applications\u003c\/li\u003e\n\u003cli\u003ePower supply mode offers stable power for sensitive loads\u003c\/li\u003e\n\u003cli\u003eHeavy-duty connections for easy installation and quick setup via DIP switches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery Temperature Sensor: Yes, included\u003c\/li\u003e\n\u003cli\u003eBattery Voltage Sense: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e General Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStatus Indicator: Yes, 3-color LED\u003c\/li\u003e\n\u003cli\u003eCommunication Protocol: MasterBus, CZone \u0026amp; NMEA 2000\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 10-15 V\u003c\/li\u003e\n\u003cli\u003eNominal Output Voltage: 12 V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Stabilization: 2 % at extremes of temperatures, load, and input\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Ripple (peak-peak): Max. 1 %\u003c\/li\u003e\n\u003cli\u003eMax. Output Power: 725 W\u003c\/li\u003e\n\u003cli\u003eNominal Output Power: 675 W\u003c\/li\u003e\n\u003cli\u003eMax. Output Current: 50 A\u003c\/li\u003e\n\u003cli\u003eOutput Charge Current (3-step mode): 50 A\u003c\/li\u003e\n\u003cli\u003eNominal Input Voltage: 12 V\u003c\/li\u003e\n\u003cli\u003eInput Voltage Range: 10-16 V\u003c\/li\u003e\n\u003cli\u003eMax. Input Current: 50 A\u003c\/li\u003e\n\u003cli\u003eGalvanic Isolation: No\u003c\/li\u003e\n\u003cli\u003eVoltage Limited: Yes\u003c\/li\u003e\n\u003cli\u003eEfficiency: \u0026gt; 95 % (at nom. input voltage, full load); peak 97\u003c\/li\u003e\n\u003cli\u003eParallel Configuration: Yes\u003c\/li\u003e\n\u003cli\u003eAlarm Contact: Yes, through MasterBus\u003c\/li\u003e\n\u003cli\u003eMasterBus Powering: No\u003c\/li\u003e\n\u003cli\u003eEngine Run Signal Input: Yes (active high\/active low)\u003c\/li\u003e\n\u003cli\u003eDIP Switches: Yes, for basic setup\u003c\/li\u003e\n\u003cli\u003eDimensions, H x W x D: 255 x 165 x 66 mm (10.0 x 6.5 x 2.6 inch)\u003c\/li\u003e\n\u003cli\u003eWeight: 2 kg (4.4 lb)\u003c\/li\u003e\n\u003cli\u003eCompliance: CE, E-Mark, SAE J1171 \u0026amp; ISO 8846 Ignition Protected\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e Technical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo-load Consumption: \u0026lt; 2 mA\u003c\/li\u003e\n\u003cli\u003eCharge Characteristic: 3-traps+\u003c\/li\u003e\n\u003cli\u003eBattery Types: Flooded, Gel, AGM, spiral, Lithium Ion, traction, user-defined\u003c\/li\u003e\n\u003cli\u003e3-Step Charge Option: Yes (DIP switch settings)\u003c\/li\u003e\n\u003cli\u003eDC Consumption: \u0026lt; 5 mA\u003c\/li\u003e\n\u003cli\u003eConnections: 3 x M8 terminal for cable diameters of 10-50 mm², (positive input, positive output, joint negative connection) 8-pole screw connection for cable diameters of 0.75-1.5 mm² (remote on\/off, temperature sensor, voltage measurement\u003c\/li\u003e\n\u003cli\u003eTemperature Range (ambient temp.): -25 degrees C to 60 degrees C; derating \u0026gt; 40\u003c\/li\u003e\n\u003cli\u003eCooling: Natural cooling\u003c\/li\u003e\n\u003cli\u003eProtection Degree: IP23\u003c\/li\u003e\n\u003cli\u003eProtections: Overload, over temperature, DC short circuit, reversed polarity (fuse)\u003c\/li\u003e\n\u003cli\u003eMasterBus Compatible: Yes\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":46488473370694,"sku":"GCO-102659","price":709.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102659XL_7d1103ff-a63c-4a05-bad4-d6b76c3c4a0f.jpg?v=1790091459"},{"product_id":"mastervolt-mac-plus-24-12-50-czone","title":"Mastervolt Mac Plus 24\/12-50 + CZone","description":"\u003cp\u003e\u003cstrong\u003eMac Plus 24\/12-50 + CZone\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoost the Service Battery\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eToo often, service batteries don’t get the charge they need. This is a problem made worse by smart alternators and start\/stop systems, which result in slow and insufficient charges. The Mac Plus DC-DC charger solves this problem, providing a quick, safe, and consistent charge to the service battery. And, by knowing when the engine is running and providing charge, users can be sure that the Mac Plus will never drain a starter battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProven Mastervolt Quality\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUsers get peace of mind knowing that they have the best on board. Using the proven Mastervolt 3-step+ charge algorithm, the Mac Plus delivers a quick and easy charge, even for completely flat batteries.\u003c\/p\u003e\u003cp\u003eA robust design holds up in even the harshest conditions, with battery temperature-optimized charging and a high-quality aluminum housing to ensure superior protection against dust and water ingress. The power-efficient design also allows the Mac Plus to operate silently and without a fan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTotal Power Flexibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith a wide DC input range, the Mac Plus allows for all DC sources and can charge two batteries from a single alternator or charger. It supports a full range of chemistries and battery types, including lithium. It also functions seamlessly with modern alternators such as Euro 5 and 6, ensuring proper charging by providing constant power, even when the alternator is inactive.\u003c\/p\u003e\u003cp\u003eParallel configuration of up to ten units will provide over 100 amperes. Advanced high-frequency technology with modern microprocessors ensures minimal power loss when switching from 12V to 24V and vice versa.\u003c\/p\u003e\u003cp\u003eAnalog voltage sense ports are also available to compensate for voltage drops and maintain proper charging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuperior Monitoring \u0026amp; Control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCompatibility with CZone®, NMEA 2000®, and MasterBus delivers truly superior monitoring and control and ensures Mac Plus integrates easily into complete systems. Achieve the best performance possible via various controllers and high-quality MOSFETs. And configure the Mac Plus with ease via MasterAdjust, the CZone configuration tool, or even via the on-board DIP switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast and safe charging, even during short trips\u003c\/li\u003e\n\u003cli\u003eFanless design for silent operation\u003c\/li\u003e\n\u003cli\u003eSuitable for flooded, Gel, AGM, and Li-Ion batteries (incl. LiFePO4)\u003c\/li\u003e\n\u003cli\u003eEven charges fully depleted batteries\u003c\/li\u003e\n\u003cli\u003eEngine run detection protects the starter battery\u003c\/li\u003e\n\u003cli\u003eAdjustable current limits to meet Euro 5\/6 requirements\u003c\/li\u003e\n\u003cli\u003eVoltage stabilization protects sensitive equipment, lights, and loads\u003c\/li\u003e\n\u003cli\u003eParallel operation to obtain charging capacities well over 100 Amps\u003c\/li\u003e\n\u003cli\u003eMasterBus, CZone, and NMEA 2000 are compatible for intelligent system monitoring and automation\u003c\/li\u003e\n\u003cli\u003eTemperature compensation and voltage sense for an optimal charging result\u003c\/li\u003e\n\u003cli\u003eE-Mark\/R10 certification for mobile applications\u003c\/li\u003e\n\u003cli\u003ePower supply mode offers stable power for sensitive loads\u003c\/li\u003e\n\u003cli\u003eHeavy-duty connections for easy installation and quick setup via DIP switches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery Temperature Sensor: Yes, included\u003c\/li\u003e\n\u003cli\u003eBattery Voltage Sense: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eGeneral Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStatus Indicator: Yes, 3-color LED\u003c\/li\u003e\n\u003cli\u003eCommunication Protocol: MasterBus, CZone \u0026amp; NMEA 2000\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 10-15 V\u003c\/li\u003e\n\u003cli\u003eNominal Output Voltage: 12 V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Stabilization: 2 % at extremes of temperatures, load, and input\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Ripple (peak-peak): Max. 1 %\u003c\/li\u003e\n\u003cli\u003eMax. Output Power: 750 W\u003c\/li\u003e\n\u003cli\u003eNominal Output Power: 710 W\u003c\/li\u003e\n\u003cli\u003eMax. Output Current: 50 A\u003c\/li\u003e\n\u003cli\u003eOutput Charge Current (3-step mode): 50 A\u003c\/li\u003e\n\u003cli\u003eNominal Input Voltage: 24 V\u003c\/li\u003e\n\u003cli\u003eInput Voltage Range: 19-30 V\u003c\/li\u003e\n\u003cli\u003eMax. Input Current: 30 A\u003c\/li\u003e\n\u003cli\u003eGalvanic Isolation: No\u003c\/li\u003e\n\u003cli\u003eVoltage Limited: Yes\u003c\/li\u003e\n\u003cli\u003eEfficiency: \u0026gt; 95 % (at nom. input voltage, full load); peak 97\u003c\/li\u003e\n\u003cli\u003eParallel Configuration: Yes\u003c\/li\u003e\n\u003cli\u003eAlarm Contact: Yes, through MasterBus\u003c\/li\u003e\n\u003cli\u003eMasterBus Powering: No\u003c\/li\u003e\n\u003cli\u003eEngine Run Signal Input: Yes (active high\/active low)\u003c\/li\u003e\n\u003cli\u003eDIP Switches: Yes, for basic setup\u003c\/li\u003e\n\u003cli\u003eDimensions, H x W x D: 255 x 165 x 66 mm (10.0 x 6.5 x 2.6 inch)\u003c\/li\u003e\n\u003cli\u003eWeight: 2 kg (4.4 lb)\u003c\/li\u003e\n\u003cli\u003eCompliance: CE, E-Mark, SAE J1171 \u0026amp; ISO 8846 Ignition Protected\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo-load Consumption: \u0026lt; 2 mA\u003c\/li\u003e\n\u003cli\u003eCharge Characteristic: 3-traps+\u003c\/li\u003e\n\u003cli\u003eBattery Types: Flooded, Gel, AGM, spiral, Lithium Ion, traction, user-defined\u003c\/li\u003e\n\u003cli\u003e3-Step Charge Option: Yes (DIP switch settings)\u003c\/li\u003e\n\u003cli\u003eDC Consumption: \u0026lt; 5 mA\u003c\/li\u003e\n\u003cli\u003eConnections: 3 x M8 terminal for cable diameters of 10-50 mm², (positive input, positive output, joint negative connection) 8-pole screw connection for cable diameters of 0.75-1.5 mm² (remote on\/off, temperature sensor, voltage measurement\u003c\/li\u003e\n\u003cli\u003eTemperature Range (ambient temp.): -25 degrees C to 60 degrees C; derating \u0026gt; 40\u003c\/li\u003e\n\u003cli\u003eCooling: Natural cooling\u003c\/li\u003e\n\u003cli\u003eProtection Degree: IP23\u003c\/li\u003e\n\u003cli\u003eProtections: Overload, over temperature, DC short circuit, reversed polarity (fuse)\u003c\/li\u003e\n\u003cli\u003eMasterBus Compatible: Yes\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":46488473403462,"sku":"GCO-102660","price":709.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102660XL.jpg?v=1789730112"},{"product_id":"mastervolt-mac-plus-12-24-30-czone","title":"Mastervolt Mac Plus 12\/24-30 + CZone","description":"\u003cp\u003e\u003cstrong\u003eMac Plus 12\/24-30 + CZone\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoost the Service Battery\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eToo often, service batteries don’t get the charge they need. This is a problem made worse by smart alternators and start\/stop systems, which result in slow and insufficient charges. The Mac Plus DC-DC charger solves this problem, providing a quick, safe, and consistent charge to the service battery. And, by knowing when the engine is running and providing charge, users can be sure that the Mac Plus will never drain a starter battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProven Mastervolt Quality\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUsers get peace of mind knowing that they have the best on board. Using the proven Mastervolt 3-step+ charge algorithm, the Mac Plus delivers a quick and easy charge, even for completely flat batteries.\u003c\/p\u003e\u003cp\u003eA robust design holds up in even the harshest conditions, with battery temperature-optimized charging and a high-quality aluminum housing to ensure superior protection against dust and water ingress. The power-efficient design also allows the Mac Plus to operate silently and without a fan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTotal Power Flexibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith a wide DC input range, the Mac Plus allows for all DC sources and can charge two batteries from a single alternator or charger. It supports a full range of chemistries and battery types, including lithium. It also functions seamlessly with modern alternators such as Euro 5 and 6, ensuring proper charging by providing constant power, even when the alternator is inactive.\u003c\/p\u003e\u003cp\u003eParallel configuration of up to ten units will provide over 100 amperes. Advanced high-frequency technology with modern microprocessors ensures minimal power loss when switching from 12V to 24V and vice versa.\u003c\/p\u003e\u003cp\u003eAnalog voltage sense ports are also available to compensate for voltage drops and maintain proper charging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuperior Monitoring \u0026amp; Control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCompatibility with CZone®, NMEA 2000®, and MasterBus delivers truly superior monitoring and control and ensures Mac Plus integrates easily into complete systems. Achieve the best performance possible via various controllers and high-quality MOSFETs. And configure the Mac Plus with ease via MasterAdjust, the CZone configuration tool, or even via the on-board DIP switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast and safe charging, even during short trips\u003c\/li\u003e\n\u003cli\u003eFanless design for silent operation\u003c\/li\u003e\n\u003cli\u003eSuitable for flooded, Gel, AGM, and Li-Ion batteries (incl. LiFePO4)\u003c\/li\u003e\n\u003cli\u003eEven charges fully depleted batteries\u003c\/li\u003e\n\u003cli\u003eEngine run detection protects the starter battery\u003c\/li\u003e\n\u003cli\u003eAdjustable current limits to meet Euro 5\/6 requirements\u003c\/li\u003e\n\u003cli\u003eVoltage stabilization protects sensitive equipment, lights, and loads\u003c\/li\u003e\n\u003cli\u003eParallel operation to obtain charging capacities well over 100 Amps\u003c\/li\u003e\n\u003cli\u003eMasterBus, CZone, and NMEA 2000 are compatible for intelligent system monitoring and automation\u003c\/li\u003e\n\u003cli\u003eTemperature compensation and voltage sense for an optimal charging result\u003c\/li\u003e\n\u003cli\u003eE-Mark\/R10 certification for mobile applications\u003c\/li\u003e\n\u003cli\u003ePower supply mode offers stable power for sensitive loads\u003c\/li\u003e\n\u003cli\u003eHeavy-duty connections for easy installation and quick setup via DIP switches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery Temperature Sensor: Yes, included\u003c\/li\u003e\n\u003cli\u003eBattery Voltage Sense: Yes\u003c\/li\u003e\n\u003cli\u003e General Specifications:\u003c\/li\u003e\n\u003cli\u003eStatus Indicator: Yes, 3-color LED\u003c\/li\u003e\n\u003cli\u003eCommunication Protocol: MasterBus, CZone \u0026amp; NMEA 2000\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 20-30 V\u003c\/li\u003e\n\u003cli\u003eNominal Output Voltage: 24 V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Stabilization: 2 % at extremes of temperatures, load, and input\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Ripple (peak-peak): Max. 1 %\u003c\/li\u003e\n\u003cli\u003eMax. Output Power: 725 W\u003c\/li\u003e\n\u003cli\u003eNominal Output Power: 675 W\u003c\/li\u003e\n\u003cli\u003eMax. Output Current: 30 A\u003c\/li\u003e\n\u003cli\u003eOutput Charge Current (3-step mode): 30 A\u003c\/li\u003e\n\u003cli\u003eNominal Input Voltage: 12 V\u003c\/li\u003e\n\u003cli\u003eInput Voltage Range: 10-16 V\u003c\/li\u003e\n\u003cli\u003eMax. Input Current: 50 A\u003c\/li\u003e\n\u003cli\u003eGalvanic Isolation: No\u003c\/li\u003e\n\u003cli\u003eVoltage Limited: Yes\u003c\/li\u003e\n\u003cli\u003eEfficiency: \u0026gt; 95 % (at nom. input voltage, full load); peak 97\u003c\/li\u003e\n\u003cli\u003eParallel Configuration: Yes\u003c\/li\u003e\n\u003cli\u003eAlarm Contact: Yes, through MasterBus\u003c\/li\u003e\n\u003cli\u003eMasterBus Powering: No\u003c\/li\u003e\n\u003cli\u003eEngine Run Signal Input: Yes (active high\/active low)\u003c\/li\u003e\n\u003cli\u003eDIP Switches: Yes, for basic setup\u003c\/li\u003e\n\u003cli\u003eDimensions, H x W x D: 255 x 165 x 66 mm (10.0 x 6.5 x 2.6 inch)\u003c\/li\u003e\n\u003cli\u003eWeight: 2 kg (4.4 lb)\u003c\/li\u003e\n\u003cli\u003eCompliance: CE, E-Mark, SAE J1171 \u0026amp; ISO 8846 Ignition Protected\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e Technical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo-load Consumption: \u0026lt; 2 mA\u003c\/li\u003e\n\u003cli\u003eCharge Characteristic: 3-traps+\u003c\/li\u003e\n\u003cli\u003eBattery Types: Flooded, Gel, AGM, spiral, Lithium Ion, traction, user-defined\u003c\/li\u003e\n\u003cli\u003e3-Step Charge Option: Yes (DIP switch settings)\u003c\/li\u003e\n\u003cli\u003eDC Consumption: \u0026lt; 5 mA\u003c\/li\u003e\n\u003cli\u003eConnections: 3 x M8 terminal for cable diameters of 10-50 mm², (positive input, positive output, joint negative connection) 8-pole screw connection for cable diameters of 0.75-1.5 mm² (remote on\/off, temperature sensor, voltage measurement\u003c\/li\u003e\n\u003cli\u003eTemperature Range (ambient temp.): -25 degrees C to 60 degrees C; derating \u0026gt; 40\u003c\/li\u003e\n\u003cli\u003eCooling: Natural cooling\u003c\/li\u003e\n\u003cli\u003eProtections: Overload, over temperature, DC short circuit, reversed polarity (fuse)\u003c\/li\u003e\n\u003cli\u003eMasterBus Compatible: Yes\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":46488473436230,"sku":"GCO-102661","price":709.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102661XL.jpg?v=1789730114"},{"product_id":"mastervolt-mac-plus-24-24-30-czone","title":"Mastervolt Mac Plus 24\/24-30 + CZone","description":"\u003cp\u003e\u003cstrong\u003eMac Plus 24\/24-30 + CZone\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoost the Service Battery\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eToo often, service batteries don’t get the charge they need. This is a problem made worse by smart alternators and start\/stop systems, which result in slow and insufficient charges. The Mac Plus DC-DC charger solves this problem, providing a quick, safe, and consistent charge to the service battery. And, by knowing when the engine is running and providing charge, users can be sure that the Mac Plus will never drain a starter battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProven Mastervolt Quality\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUsers get peace of mind knowing that they have the best on board. Using the proven Mastervolt 3-step+ charge algorithm, the Mac Plus delivers a quick and easy charge, even for completely flat batteries.\u003c\/p\u003e\u003cp\u003eA robust design holds up in even the harshest conditions, with battery temperature-optimized charging and a high-quality aluminum housing to ensure superior protection against dust and water ingress. The power-efficient design also allows the Mac Plus to operate silently and without a fan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTotal Power Flexibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith a wide DC input range, the Mac Plus allows for all DC sources and can charge two batteries from a single alternator or charger. It supports a full range of chemistries and battery types, including lithium. It also functions seamlessly with modern alternators such as Euro 5 and 6, ensuring proper charging by providing constant power, even when the alternator is inactive.\u003c\/p\u003e\u003cp\u003eParallel configuration of up to ten units will provide over 100 amperes. Advanced high-frequency technology with modern microprocessors ensures minimal power loss when switching from 12V to 24V and vice versa.\u003c\/p\u003e\u003cp\u003eAnalog voltage sense ports are also available to compensate for voltage drops and maintain proper charging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuperior Monitoring \u0026amp; Control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCompatibility with CZone®, NMEA 2000®, and MasterBus delivers truly superior monitoring and control and ensures Mac Plus integrates easily into complete systems. Achieve the best performance possible via various controllers and high-quality MOSFETs. And configure the Mac Plus with ease via MasterAdjust, the CZone configuration tool, or even via the on-board DIP switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast and safe charging, even during short trips\u003c\/li\u003e\n\u003cli\u003eFanless design for silent operation\u003c\/li\u003e\n\u003cli\u003eSuitable for flooded, Gel, AGM, and Li-Ion batteries (incl. LiFePO4)\u003c\/li\u003e\n\u003cli\u003eEven charges fully depleted batteries\u003c\/li\u003e\n\u003cli\u003eEngine run detection protects the starter battery\u003c\/li\u003e\n\u003cli\u003eAdjustable current limits to meet Euro 5\/6 requirements\u003c\/li\u003e\n\u003cli\u003eVoltage stabilization protects sensitive equipment, lights, and loads\u003c\/li\u003e\n\u003cli\u003eParallel operation to obtain charging capacities well over 100 Amps\u003c\/li\u003e\n\u003cli\u003eMasterBus, CZone, and NMEA 2000 are compatible for intelligent system monitoring and automation\u003c\/li\u003e\n\u003cli\u003eTemperature compensation and voltage sense for an optimal charging result\u003c\/li\u003e\n\u003cli\u003eE-Mark\/R10 certification for mobile applications\u003c\/li\u003e\n\u003cli\u003ePower supply mode offers stable power for sensitive loads\u003c\/li\u003e\n\u003cli\u003eHeavy-duty connections for easy installation and quick setup via DIP switches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery Temperature Sensor: Yes, included\u003c\/li\u003e\n\u003cli\u003eBattery Voltage Sense: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e General Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStatus Indicator: Yes, 3-color LED\u003c\/li\u003e\n\u003cli\u003eCommunication Protocol: MasterBus, CZone \u0026amp; NMEA 2000\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 20-30 V\u003c\/li\u003e\n\u003cli\u003eNominal Output Voltage: 24 V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Stabilization: 2 % at extremes of temperatures, load, and input\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Ripple (peak-peak): Max. 1 %\u003c\/li\u003e\n\u003cli\u003eMax. Output Power: 850 W\u003c\/li\u003e\n\u003cli\u003eNominal Output Power: 810 W\u003c\/li\u003e\n\u003cli\u003eMax. Output Current: 30 A\u003c\/li\u003e\n\u003cli\u003eOutput Charge Current (3-step mode): 30 A\u003c\/li\u003e\n\u003cli\u003eNominal Input Voltage: 24 V\u003c\/li\u003e\n\u003cli\u003eInput Voltage Range: 19-30 V\u003c\/li\u003e\n\u003cli\u003eMax. Input Current: 30 A\u003c\/li\u003e\n\u003cli\u003eGalvanic Isolation: No\u003c\/li\u003e\n\u003cli\u003eVoltage Limited: Yes\u003c\/li\u003e\n\u003cli\u003eEfficiency: \u0026gt; 95 % (at nom. input voltage, full load); peak 97\u003c\/li\u003e\n\u003cli\u003eParallel Configuration: Yes\u003c\/li\u003e\n\u003cli\u003eAlarm Contact: Yes, through MasterBus\u003c\/li\u003e\n\u003cli\u003eMasterBus Powering: No\u003c\/li\u003e\n\u003cli\u003eEngine Run Signal Input: Yes (active high\/active low)\u003c\/li\u003e\n\u003cli\u003eDIP Switches: Yes, for basic setup\u003c\/li\u003e\n\u003cli\u003eDimensions, H x W x D: 255 x 165 x 66 mm (10.0 x 6.5 x 2.6 inch)\u003c\/li\u003e\n\u003cli\u003eWeight: 2 kg (4.4 lb)\u003c\/li\u003e\n\u003cli\u003eCompliance: CE, E-Mark, SAE J1171 \u0026amp; ISO 8846 Ignition Protected\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e Technical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo-load Consumption: \u0026lt; 2 mA\u003c\/li\u003e\n\u003cli\u003eCharge Characteristic: 3-traps+\u003c\/li\u003e\n\u003cli\u003eBattery Types: Flooded, Gel, AGM, spiral, Lithium Ion, traction, user-defined\u003c\/li\u003e\n\u003cli\u003e3-Step Charge Option: Yes (DIP switch settings)\u003c\/li\u003e\n\u003cli\u003eDC Consumption: \u0026lt; 5 mA\u003c\/li\u003e\n\u003cli\u003eConnections: 3 x M8 terminal for cable diameters of 10-50 mm², (positive input, positive output, joint negative connection) 8-pole screw connection for cable diameters of 0.75-1.5 mm² (remote on\/off, temperature sensor, voltage measurement\u003c\/li\u003e\n\u003cli\u003eTemperature Range (ambient temp.): -25 degrees C to 60 degrees C; derating \u0026gt; 40\u003c\/li\u003e\n\u003cli\u003eCooling: Natural cooling\u003c\/li\u003e\n\u003cli\u003eProtections: Overload, over temperature, DC short circuit, reversed polarity (fuse)\u003c\/li\u003e\n\u003cli\u003eMasterBus Compatible: Yes\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":46488473468998,"sku":"GCO-102662","price":709.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102662XL_9c1c22e6-124b-46de-aefc-a976e5488780.jpg?v=1788874004"},{"product_id":"victron-skylla-tg-charger-24-30-gmdss","title":"Victron Skylla-TG Charger - 24\/30 GMDSS","description":"\u003cp\u003e\u003cstrong\u003eSkylla-TG Charger - 24\/30 GMDSS\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Victron Skylla-TG 24\/30 Charger has been designed to provide all required monitoring and alarm data. Both the battery and the GMDSS system are connected directly to the charger. Data and alarms are displayed on a digital panel (VE.Net GMDSS panel, to be ordered separately). A standard eight-wire UTP cable connects the charger to the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGMDSS\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Global Maritime Distress \u0026amp; Safety System (GMDSS) was developed by the International Maritime Organisation (IMO) to improve maritime distress and safety communications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower Supply\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Skylla TG has proven itself to be an excellent battery charger and power supply for GMDSS applications. However, when using a standard Skylla charger, additional equipment is needed to perform the monitoring and alarm functions required for GMDSS.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Made Easy: The Skylla GMDSS\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Victron Skylla GMDSS Charger has been designed to provide all required monitoring and alarm data. Both the battery and the GMDSS system are connected directly to the charger. Data and alarms are displayed on a digital panel (VE.Net GMDSS panel, to be ordered separately). A standard eight-wire UTP cable connects the charger to the panel.  Skylla TG 24 30 GMDSS\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo Adjustments Needed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe whole system is ‘click and go’: the panels are pre-programmed for GMDSS functionality. A simple, intuitive menu allows changing of settings if required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBattery Time To Go\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Skylla GMDSS charger has a built-in battery controller. The capacity of the battery is fully monitored, so the panel can even indicate the ’time to go’ in case of a power supply blackout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePerfect Charger for Any Type of Battery\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCharge voltage can be precisely adjusted to suit any VRLA or flooded battery system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage (V AC): 120 \/ 230\u003c\/li\u003e\n\u003cli\u003eInput Voltage Range (V AC): 90-265\u003c\/li\u003e\n\u003cli\u003eFrequency (Hz): 45-65\u003c\/li\u003e\n\u003cli\u003ePower Factor: 1\u003c\/li\u003e\n\u003cli\u003eCharge Voltage ‘Absorption’ (V DC): 28,5\u003c\/li\u003e\n\u003cli\u003eCharge Voltage 'Float' (V DC): 26,5\u003c\/li\u003e\n\u003cli\u003eCharge Current (A): 30 (limited to 22 A at 110 V AC)\u003c\/li\u003e\n\u003cli\u003eCharge Characteristic: IUoUo (three-step)\u003c\/li\u003e\n\u003cli\u003eTemperature Sensor: Yes\u003c\/li\u003e\n\u003cli\u003eCan Be Used as Power Supply: Yes\u003c\/li\u003e\n\u003cli\u003eForced Cooling: Yes\u003c\/li\u003e\n\u003cli\u003eProtection: a, b, c, d\u003c\/li\u003e\n\u003cli\u003eOperating Temp. Range: -40 to +50 degrees C (-40 – 122 degrees F)\u003c\/li\u003e\n\u003cli\u003eHumidity (non-condensing): Max 95%\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial \u0026amp; Color: Aluminium (blue RAL 5012)\u003c\/li\u003e\n\u003cli\u003eBattery-Connection: Two 1,5 m Cables\u003c\/li\u003e\n\u003cli\u003eGMDSS connection One 1,5 m cable (+ to be taken directly from the battery)\u003c\/li\u003e\n\u003cli\u003e230 V AC-Connection: Three wire 2,5 mm² (AWG 6); Cable Length: 2 m\u003c\/li\u003e\n\u003cli\u003eProtection Category: IP 21   \u003c\/li\u003e\n\u003cli\u003eWeight kg (lbs.): 6 (13)\u003c\/li\u003e\n\u003cli\u003eDimensions H x W x D in mm (H x W x D in inches): 485 x 250 x147 (19.1 x 9.9 x 5.8)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAccessories:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVE.Net GMDSS panel: To be ordered separately\u003c\/li\u003e\n\u003cli\u003eUTP-cable: To be ordered separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSafety: EN 60335-1, EN 60335-2-29\u003c\/li\u003e\n\u003cli\u003eEmission Immunity:  EN 55014-1, EN 61000-3-2\u003c\/li\u003e\n\u003cli\u003eImmunity: EN 55014-2, EN 61000-3-3\u003c\/li\u003e\n\u003cli\u003eMaritime Nav. \u0026amp; Radiocomm: IEC 60945\u003c\/li\u003e\n\u003cli\u003eProtection Key: a) Output short circuit; b) Battery reverse polarity detection; c) Battery voltage too high; d) Temperature too high IEC 60945 Remote panel GMDSS; 2) Up to 40 degrees C (100 degrees F) ambient\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":46488479498310,"sku":"GCO-102810","price":1037.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102810XL_e165b5c6-23a0-4015-984d-15d9d054bf8d.jpg?v=1788874359"},{"product_id":"mastervolt-mac-plus-12-48-15","title":"Mastervolt Mac Plus 12\/48-15","description":"\u003cp\u003e\u003cstrong\u003eMac Plus 12\/48-15\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoost Your Service Battery\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eToo often, service batteries don’t get the charge they need. This is a problem made worse by smart alternators and start\/stop systems, which result in slow and insufficient charges. The Mac Plus 48V and 36V solve that problem. With brand-new bi-directional technology, the Mac Plus can use each side as an input or output, delivering a reliable and consistent charge to both service and starter batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProven Mastervolt Quality\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Mac Plus uses the proven Mastervolt 3-step+ charge algorithm, delivering a quick and easy charge, even to completely flat batteries. By knowing when the engine is running and providing charge, you can also be sure that the Mac Plus will never drain your starter battery.\u003c\/p\u003e\u003cp\u003eA robust design holds up in even the harshest conditions, with battery temperature-optimized charging and high-quality aluminum housing to ensure superior protection against dust and water ingress. The power-efficient design also allows the Mac Plus to operate silently and without a fan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTotal Power Flexibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith a wide DC input range, the Mac Plus allows all DC sources and can charge two batteries from a single alternator or charger. It supports a full range of chemistries and battery types, including lithium. It also functions seamlessly with modern alternators such as Euro 5 and 6, ensuring proper charging by providing constant power, even when the alternator is inactive.\u003c\/p\u003e\u003cp\u003eParallel configuration of up to ten units will provide over 100 amperes. And advanced high-frequency technology with modern microprocessors ensures minimal power loss when switching from 36\/48V to 12\/24V and vice versa.\u003c\/p\u003e\u003cp\u003eAnalog voltage sense ports are also available to compensate for voltage drops and maintain proper charging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuperior Monitoring \u0026amp; Control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCompatibility with CZone®, NMEA 2000®, and MasterBus delivers truly superior monitoring and control and ensures Mac Plus integrates easily into complete systems. Achieve the best performance possible via various controllers and high-quality MOSFETs. And configure the Mac Plus with ease via MasterAdjust, the CZone configuration tool, or even via the on-board DIP switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBi-directional technology\u003c\/li\u003e\n\u003cli\u003eGet either 48V or 36V power from a single unit\u003c\/li\u003e\n\u003cli\u003eFast and safe charging, even during short trips\u003c\/li\u003e\n\u003cli\u003eFanless design for silent operation\u003c\/li\u003e\n\u003cli\u003eSuitable for flooded, Gel, AGM, and Li-Ion batteries (incl. LiFePO4)\u003c\/li\u003e\n\u003cli\u003eEven charges fully depleted batteries\u003c\/li\u003e\n\u003cli\u003eEngine run detection protects the starter battery\u003c\/li\u003e\n\u003cli\u003eAdjustable current limits to meet Euro 5\/6 requirements\u003c\/li\u003e\n\u003cli\u003eVoltage stabilization protects sensitive equipment, lights, and loads\u003c\/li\u003e\n\u003cli\u003eParallel operation to obtain charging capacities well over 100 Amps\u003c\/li\u003e\n\u003cli\u003eMasterBus, CZone, and NMEA 2000 compatible, with intelligent system monitoring and automation\u003c\/li\u003e\n\u003cli\u003eTemperature compensation and voltage sense for an optimal charging result\u003c\/li\u003e\n\u003cli\u003eE-Mark\/R10 certification for mobile applications\u003c\/li\u003e\n\u003cli\u003ePower supply mode offers stable power for sensitive loads\u003c\/li\u003e\n\u003cli\u003eHeavy-duty connections for easy installation and quick setup via DIP switches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eGeneral Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery Voltage Sense: Yes\u003c\/li\u003e\n\u003cli\u003eStatus indicator: Yes, 3 color double LED\u003c\/li\u003e\n\u003cli\u003eCommunication protocol: MasterBus, CZone \u0026amp; NMEA 2000\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 30-60 V DC\u003c\/li\u003e\n\u003cli\u003eNominal output voltage: 36\/48 V\u003c\/li\u003e\n\u003cli\u003eOutput voltage stabilization: 2 % at extremes of temps, load, and input\u003c\/li\u003e\n\u003cli\u003eOutput voltage ripple (peak-peak): Max. 1 %\u003c\/li\u003e\n\u003cli\u003eMax. output power: 900 W\u003c\/li\u003e\n\u003cli\u003eMax. output current: 15 A\u003c\/li\u003e\n\u003cli\u003eNominal input voltage: 12 V DC\u003c\/li\u003e\n\u003cli\u003eInput voltage range: 8-16 V\u003c\/li\u003e\n\u003cli\u003eMax. input current: 60 A\u003c\/li\u003e\n\u003cli\u003eGalvanic isolation: No\u003c\/li\u003e\n\u003cli\u003eEfficiency: \u0026gt; 95 % (at nom. input voltage, full load); 97 % peak\u003c\/li\u003e\n\u003cli\u003eParallel configuration: Yes, up to 4\u003c\/li\u003e\n\u003cli\u003eAlarm contact: Yes, through MasterBus, CZone, DIP Switch, or remote switch\u003c\/li\u003e\n\u003cli\u003eEngine run signal input: Yes (active high\/active low)\u003c\/li\u003e\n\u003cli\u003eDIP switches: Yes, for basic setup\u003c\/li\u003e\n\u003cli\u003eDimensions, hxwxd: 255x165x66 mm, 10.0 x 6.5 x 2.6 inch\u003c\/li\u003e\n\u003cli\u003eWeight: 2 kg, 4.4 lb\u003c\/li\u003e\n\u003cli\u003eCompliance: CE, E-Mark, SAE J1171, ISO 8846 ignition protected, ABYC \u0026amp; UKCA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery types: Gel, AGM, Lithium Ion, user-defined\u003c\/li\u003e\n\u003cli\u003ePower consumption: \u0026lt; 5 mA, \u0026lt; 10 mA in CZone, \u0026lt; 1 mA in MasterBus\u003c\/li\u003e\n\u003cli\u003eTemperature range (ambient temp.): - 25 °C to 60 °C; derating \u0026gt; 40 °C\/104 °F\u003c\/li\u003e\n\u003cli\u003eCooling: Natural cooling\u003c\/li\u003e\n\u003cli\u003eProtection degree: IP23\u003c\/li\u003e\n\u003cli\u003eProtections: Overload, over-temperature, DC short circuit, reversed polarity (fuse)\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":46488482086982,"sku":"GCO-102913","price":766.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/102913XL.jpg?v=1789730602"},{"product_id":"promariner-prosporthd-15-gen-4-15-amp-3-bank-battery-charger","title":"ProMariner ProSportHD 15 Gen 4 - 15 Amp - 3-Bank Battery Charger","description":"\u003cp\u003e\u003cstrong\u003eProSportHD 15 Gen 4 - 15 Amp - 3-Bank Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling while delivering true rated amp output during charge mode. \u003c\/p\u003e\u003cp\u003eProSportHD's enhanced microprocessor and software provide digital features including a fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators, and three digitally selectable performance charge profiles for Flooded (lead acid), AGM, and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. \u003c\/p\u003e\u003cp\u003eFully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real-time installation and battery fault status. \u003c\/p\u003e\u003cp\u003eDesigned for harsh environments with our industrial-grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProMar Digital Technology Microprocessor and software-controlled charging technology for fast, precise charging\u003c\/li\u003e\n\u003cli\u003eDistributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower, and rear-facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode\u003c\/li\u003e\n\u003cli\u003eExpanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four-color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status, and Battery Type indication\u003c\/li\u003e\n\u003cli\u003eLightweight Design Up to 40% lighter compared to an epoxy-filled charger\u003c\/li\u003e\n\u003cli\u003eAuto-Maintain Energy Saver Mode Monitor and auto-maintain batteries only when needed to maintain a full state of charge. This significantly reduces AC power consumption\u003c\/li\u003e\n\u003cli\u003eFully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains, and reconditions batteries once a month during storage periods. Fully charges and extends battery life\u003c\/li\u003e\n\u003cli\u003eBuilt-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE are listed. FCC Class B\u003c\/li\u003e\n\u003cli\u003eEasy installation and operation Pre-wired with 6’ AC and DC cables\u003c\/li\u003e\n\u003cli\u003eBattery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries\u003c\/li\u003e\n\u003cli\u003e3 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDC Voltage Systems: 12\/24v\u003c\/li\u003e\n\u003cli\u003eDC Output: Two 12VDC @ 15 amps, fully distributed\u003c\/li\u003e\n\u003cli\u003eCharging\/Maintaining VDC Output: Up to 14.7VDC\/13.8VDC\u003c\/li\u003e\n\u003cli\u003eBattery Types: Flooded (lead acid), AGM, or Gel\u003c\/li\u003e\n\u003cli\u003eAC Input: 120VAC +\/-10%, 50\/60Hz, 3A\u003c\/li\u003e\n\u003cli\u003eAmps: 15\u003c\/li\u003e\n\u003cli\u003eNo. of Batteries: 3\u003c\/li\u003e\n\u003cli\u003eAC \u0026amp; DC Cable Length: 6 ft.\u003c\/li\u003e\n\u003cli\u003eDimensions (inch): 10.5\" x 7.9\" x 2.9\"\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"ProMariner","offers":[{"title":"Default Title","offer_id":46488496078918,"sku":"GCO-103226","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/103226XL.jpg?v=1790123835"},{"product_id":"victron-bluesmart-ip65-charger-24-13-1-120v-nema-1-15p-ul-approved","title":"Victron BlueSmart IP65 Charger 24\/13 (1) 120V NEMA 1-15P UL Approved","description":"\u003cp\u003e\u003cstrong\u003eBlueSmart IP65 Charger 24\/13 (1) 120V NEMA 1-15P UL Approved\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in the workshop and on motor vehicles, such as classic cars, motorbikes, boats, and campervans. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Battery Is Charged, Smartly... To Perfect Condition\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seven-step charging algorithm gets the most out of a battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and gives it a longer life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRecovery of Deeply-Discharged ‘Dead’ Batteries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConnect the Battery with Ease\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe charger comes with both crocodile clips and M8 eyelets, making it easy to connect to the battery. If users wish, they can leave it permanently connected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the Status of the Battery Remotely\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet, or laptop. All settings of the charger can be configured with the VictronConnect app.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 120 VAC\u003c\/li\u003e\n\u003cli\u003eEfficiency: 95%\u003c\/li\u003e\n\u003cli\u003eStandby Power Consumption: 95% 0.5W \u003c\/li\u003e\n\u003cli\u003eMinimum Battery Voltage: Starts charging from down to 0V\u003c\/li\u003e\n\u003cli\u003eCharge Voltage 'Absorption': Normal: 28,8V High: 29,4V Li-ion: 28,4V\u003c\/li\u003e\n\u003cli\u003eCharge Voltage 'Float': Normal: 27,6V High: 27,6V Li-ion: 27,0V \u003c\/li\u003e\n\u003cli\u003eCharge Voltage 'Storage': Normal: 26,4V High: 26,4V Li-ion: 27,0V \u003c\/li\u003e\n\u003cli\u003eCharge Current: 5\/8A\u003c\/li\u003e\n\u003cli\u003eCharge Current in Low Current Mode: 2 \/ 3A \u003c\/li\u003e\n\u003cli\u003eTemperature Compensation (Lead-Acid Batteries Only): 32 mV\/degrees C (18mV\/degrees F\u003c\/li\u003e\n\u003cli\u003eCan Be Used as Power Supply: Yes\u003c\/li\u003e\n\u003cli\u003eBack Curreny Drain: 0.7Ah\/month  (1mA) \u003c\/li\u003e\n\u003cli\u003eProtection: Reverse polarity; Output short circuit; Over temperature \u003c\/li\u003e\n\u003cli\u003eOperating Temp. Range: -40 to +60 degrees C (full rated output up to 30 degrees C) -40  to +140 degrees F (full rated output up to 90 degrees F) \u003c\/li\u003e\n\u003cli\u003eHumidity (non-condensing): Max 95%\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnclosure Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery-Connection: Black and red cable of 1.5 meters (4.9 feet)\u003c\/li\u003e\n\u003cli\u003e120 V Ac-Connection: Cable of 1.8 meters (5.9 feet) with US NEMA 1-15 plug\u003c\/li\u003e\n\u003cli\u003eProtection Category: P65 (splash and dust proof, and ignition protected)\u003c\/li\u003e\n\u003cli\u003eWeight: 0,9kg (2lbs)\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D): 24\/8: 60 x 105 x190mm 2.3 x 4.1x 7.5 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSafety: UL 1236, CSA C22.2, EN 60335-1, 60335-2-29\u003c\/li\u003e\n\u003cli\u003eEmission: EN 55014-1, EN 61000-6-3, EN 61000-3-2\u003c\/li\u003e\n\u003cli\u003eImmunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":46488504205382,"sku":"GCO-103415","price":232.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/103415XL_c4128731-9d01-42ed-942b-43ab0cc21db4.jpg?v=1788875603"},{"product_id":"victron-orion-tr-smart-24-12-20a-240w-isolated-dc-dc-charger","title":"Victron Orion-Tr Smart 24\/12-20A (240W) Isolated DC-DC Charger","description":"\u003cp\u003e\u003cstrong\u003eOrion-TR Smart 24\/12-20A (240W) Isolated DC-DC Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Orion-Tr Smart isolated DC-DC charger serves as a DC-DC battery charger or a power supply (also designed for use as a constant voltage source), offering a wide input and output voltage range. This is especially significant in the case of vehicles with a Euro 5 or Euro 6 smart alternator, which often supplies too low charging voltage even when the engine is running or when extended cable lengths, as is often the case in boats and RVs, lead to voltage drops. In such scenarios, precise and controlled charging is imperative to fully charge the service battery while protecting the starter\/input battery from discharge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBluetooth Smart Enabled\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAny Bluetooth-enabled smartphone, tablet, or other device can be used to monitor, change settings, and update the charger when new software features become available\u003c\/li\u003e\n\u003cli\u003eInstant Readout: The VictronConnect App can display key data, including warnings and alarms, on the device list page without the need to connect to the product\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFully programmable\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery charge algorithm (configurable) or fixed output. Orion-Tr Smart 12\/12-30 Orion-Tr Smart 12\/12-30\u003c\/li\u003e\n\u003cli\u003eSmart Alternator Compatibility: engine running detection mechanism\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAdaptive 3-Stage Charge Algorithm: Bulk – Absorption – Float\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor lead-acid batteries, it is important that during shallow discharges the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged\u003c\/li\u003e\n\u003cli\u003eFor lithium batteries, the absorption time is fixed; the default is 2 hours\u003c\/li\u003e\n\u003cli\u003eAlternatively, a fixed output voltage can be chosen\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSuitable for Use in Vehicles with a Smart Alternator (Euro 5 and Euro 6 Engines)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe built-in engine shutdown detection will stop the converter when the engine is not running. This prevents unwanted discharge of the starter battery (see manual for details).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRemote On\/Off\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA remote on\/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll Models Are Short Circuit Proof and Can Be Paralleled to Increase Output Current\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn unlimited number of units can be connected in parallel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHigh Temperature Protected\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe output current will reduce at high ambient temperatures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIP43 Protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen installed with the screw terminals oriented downward.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScrew Terminals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo special tools are needed for installation. Input fuse (not replaceable) \u003c\/p\u003e\u003cp\u003e*Input fuse (not replaceable) \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage Range: 16-35 V\u003c\/li\u003e\n\u003cli\u003eUnder Voltage Shut Down: 14 V\u003c\/li\u003e\n\u003cli\u003eUnder Voltage Restart: 15 V\u003c\/li\u003e\n\u003cli\u003eNominal Output Voltage: 12.2 V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Adjust Range: 10-15 V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Tolerance: +\/- 0,2 V\u003c\/li\u003e\n\u003cli\u003eOutput Noise: 2 mV rms\u003c\/li\u003e\n\u003cli\u003eCont. Output Current at Nominal Output Voltage and 40 Degrees C: 20 A\u003c\/li\u003e\n\u003cli\u003eMaximum Output Current (10 S) at Nominal Output Voltage minus 20%: 25 A\u003c\/li\u003e\n\u003cli\u003eShort Circuit Output Current: 50 A\u003c\/li\u003e\n\u003cli\u003eCont. Output Power at 25 Degrees C: 300 W\u003c\/li\u003e\n\u003cli\u003eCont. Output Power at 40 Degrees C: 240 W\u003c\/li\u003e\n\u003cli\u003eEfficiency: 88 %\u003c\/li\u003e\n\u003cli\u003eNo Load Input Current (2): \u0026lt; 100 mA \u003c\/li\u003e\n\u003cli\u003eStandby Current: Less than 1A\u003c\/li\u003e\n\u003cli\u003eCan Be Used as Power Supply: Yes, output voltage can be set with Bluetooth \u003c\/li\u003e\n\u003cli\u003eGalvanic Isolation: 200 VDC between input, output, and case \u003c\/li\u003e\n\u003cli\u003eOperating Temperature Range -20 to +55 °C (derate 3 % per °C above 40 °C) \u003c\/li\u003e\n\u003cli\u003eHumidity: Max. 95 % non-condensing \u003c\/li\u003e\n\u003cli\u003eDC Connection: Screw terminals \u003c\/li\u003e\n\u003cli\u003eMaximum Cable Cross-Section: 16 mm²  AWG6 \u003c\/li\u003e\n\u003cli\u003eWeight: 1,3 kg (3 lb) \u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D):130 x 186 x 70 mm  (5.1 x 7.3 x 2.8 inch) \u003c\/li\u003e\n\u003cli\u003eProtection Category IP43 (electronic components), IP22 (connection area) \u003c\/li\u003e\n\u003cli\u003eStandards: Safety - Emission \/ Immunity; Automotive Directive - EN 60950 EN 61000-6-3, EN 55014-1 \/ EN 61000-6-2, EN 61000-6-1, EN 55014-2 ECE R10-5\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":46488513052742,"sku":"GCO-103510","price":159.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/103510XL_16373b79-871e-4545-9c9e-92b32e8c598a.jpg?v=1788875952"},{"product_id":"mastervolt-charge-mate-pro-lithium-40","title":"Mastervolt Charge Mate Pro Lithium 40","description":"\u003cp\u003e\u003cstrong\u003eCharge Mate Pro Lithium 40\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCurrent limited electronic charge relay with high efficiency and reverse current protection\u003c\/p\u003e\u003cp\u003eA secondary battery on board requires a dedicated charging solution. The Charge Mate Pro charging relay makes it possible to distribute the charger or alternator current effectively between two battery banks such as a starter and a service battery. The Charge Mate Pro connects both batteries during charging and keeps them isolated when discharging. This significantly reduces the risk of a flat starter battery for example.\u003c\/p\u003e\u003cp\u003eThe Charge Mate Pro offers an additional advantage over mechanical charge relays, by limiting the charge current to the second battery. The primary battery, like a starter battery, is therefore charged with priority. The return current is automatically blocked even when the secondary battery has a higher voltage. An emergency start function is possible by connecting an optional bypass switch to the Charge Master Pro.\u003c\/p\u003e\u003cp\u003eA marine application example is the connection of a bow thruster battery to a service battery. The Charge Mate Pro ensures that the service battery is always charged with priority. The blocking of the return current from the bow thruster battery guarantees that the bow battery remains charged while the current limiting also prevents power dips of the onboard electrical network.\u003c\/p\u003e\u003cp\u003eThe Charge Mate Pro series consists of a 40 Amp and a 90 Amp version, both suitable for charger or alternator applications. \u003c\/p\u003e\u003cp\u003eCharge Mate Pro: for controlled charging from a single source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLeisure and professional marine and mobile applications. An effective solution for high power demand on board and\/or the need for prioritized or current limited charging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectronic charge coupling with very low voltage drop.\u003c\/li\u003e\n\u003cli\u003eMakes effective dual charging possible.\u003c\/li\u003e\n\u003cli\u003eSuitable for charging from Lithium starter batteries to AGM\/GEL\/Lithium service batteries.\u003c\/li\u003e\n\u003cli\u003eCharge current secondary battery limited to 40 A.\u003c\/li\u003e\n\u003cli\u003eHigh system reliability by prioritizing charging of the main battery.\u003c\/li\u003e\n\u003cli\u003eUnidirectional which blocks return current under all circumstances.\u003c\/li\u003e\n\u003cli\u003ePrevents power dips in the onboard electrical network.\u003c\/li\u003e\n\u003cli\u003eSuitable for all kinds of chargers and alternators.\u003c\/li\u003e\n\u003cli\u003eMonitoring with LED status indication.\u003c\/li\u003e\n\u003cli\u003eIP65 electronics in a corrosion-resistant casing with aluminum heat sinks.\u003c\/li\u003e\n\u003cli\u003eFast and easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eGeneral Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMonitoring: LED (warnings and status indication)\u003c\/li\u003e\n\u003cli\u003eOutput current: Limited to 40 A\u003c\/li\u003e\n\u003cli\u003eNumber of battery outlets: 2\u003c\/li\u003e\n\u003cli\u003eInput voltage range: 9-32 V\u003c\/li\u003e\n\u003cli\u003eParallel configuration: Yes\u003c\/li\u003e\n\u003cli\u003eBattery voltage: automatic 12\/24 V detection\u003c\/li\u003e\n\u003cli\u003eRemote switch functions: On, off, auto, start assist\u003c\/li\u003e\n\u003cli\u003eDimensions, hxwxd: 157 x 140 x 80 mm\/6.2 x 5.5 x 3.1 inch\u003c\/li\u003e\n\u003cli\u003eWeight: 0,88 kg\/1.9 lb\u003c\/li\u003e\n\u003cli\u003eCompliance: CE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConnection possibilities: 3 x fast-on connectors (switch, ground, and status) • switch: for an optional single pole ON-OFF-ON switch for remote operation • status: for an optional LED indicator\u003c\/li\u003e\n\u003cli\u003ePower consumption: Switch open: \u0026lt; 1 mA at 12\/24 V DC\u003c\/li\u003e\n\u003cli\u003eBattery types: Suitable for charging from Lithium starter batteries to all types of batteries (for AGM\/GEL starter battery applications, please use 83304002)\u003c\/li\u003e\n\u003cli\u003eSwitch on voltage: 13.7 V (12 V) \/ 27.4 V (24 V)\u003c\/li\u003e\n\u003cli\u003eSwitch on delay: 5 sec\u003c\/li\u003e\n\u003cli\u003eSwitch off voltage: 13.3 V (12 V) \/ 26.6 V (24 V)\u003c\/li\u003e\n\u003cli\u003eSwitch off delay: 2,5 sec\u003c\/li\u003e\n\u003cli\u003eRelay: Electronically (MOSFETs with a low voltage drop of max 0.2 V)\u003c\/li\u003e\n\u003cli\u003eTemperature range (ambient temp.): -40 °C to 60\u003c\/li\u003e\n\u003cli\u003eProtection degree: IP65\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":46488522162246,"sku":"GCO-103705","price":431.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/103705XL_6bfceac2-8850-4b18-ba77-9e0474a573ea.jpg?v=1788876431"},{"product_id":"mastervolt-charge-mate-pro-lithium-90","title":"Mastervolt Charge Mate Pro Lithium 90","description":"\u003cp\u003e\u003cstrong\u003eCharge Mate Pro Lithium 90\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCurrent limited electronic charge relay with high efficiency and reverse current protection\u003c\/p\u003e\u003cp\u003eA secondary battery on board requires a dedicated charging solution. The Charge Mate Pro makes it possible to distribute the charger or alternator current effectively between two battery banks such as a starter and a service battery. The Charge Mate Pro connects both batteries during charging and keeps them isolated when discharging. This significantly reduces the risk of a flat starter battery for example.\u003c\/p\u003e\u003cp\u003eThe Charge Mate Pro offers an additional advantage over mechanical charge relays, by limiting the charge current to the second battery. The primary battery, like a starter battery, is therefore charged with priority. The return current is automatically blocked even when the secondary battery has a higher voltage. An emergency start function is possible by connecting an optional bypass switch to the Charge Master Pro.\u003c\/p\u003e\u003cp\u003eA marine application example is the connection of a bow thruster battery to a service battery. The Charge Mate Pro ensures that the service battery is always charged with priority. The blocking of the return current from the bow thruster battery guarantees that the bow battery remains charged while the current limiting also prevents power dips in the onboard electrical network.\u003c\/p\u003e\u003cp\u003eThe Charge Mate Pro series consists of a 40 Amp and a 90 Amp version, both suitable for charger or alternator applications. The Charge Mate Pro 90 ensures a higher charge current for example when charging Lithium-Ion batteries. It is also perfectly suitable for large automotive alternators up to 180 A and can be used in parallel operation with a 225 Amp alternator to fulfill even higher continuous power demands of your equipment on board.\u003c\/p\u003e\u003cp\u003eCharge Mate Pro: for controlled charging from a single source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLeisure and professional marine and mobile applications. An effective solution for high power demand on board and\/or the need for prioritized or current limited charging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCharges two battery banks from a single source.\u003c\/li\u003e\n\u003cli\u003eElectronic charge coupling with very low voltage drop.\u003c\/li\u003e\n\u003cli\u003eMakes effective dual charging possible.\u003c\/li\u003e\n\u003cli\u003eSuitable for Lithium Starter Batteries and AGM\/GEL\/Lithium Service Batteries\u003c\/li\u003e\n\u003cli\u003eCharge current secondary battery limited to 40A or 90A.\u003c\/li\u003e\n\u003cli\u003eHigh system reliability by prioritizing charging of the main battery.\u003c\/li\u003e\n\u003cli\u003eUnidirectional which blocks return current under all circumstances.\u003c\/li\u003e\n\u003cli\u003ePrevents power dips in the onboard electrical network.\u003c\/li\u003e\n\u003cli\u003eSuitable for all kinds of chargers and alternators.\u003c\/li\u003e\n\u003cli\u003eMonitoring with LED status indication.\u003c\/li\u003e\n\u003cli\u003eIP65 electronics in a corrosion-resistant casing with aluminum heat sinks.\u003c\/li\u003e\n\u003cli\u003eFast and easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eGeneral Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMonitoring: LED (warnings and status indication)\u003c\/li\u003e\n\u003cli\u003eOutput current: Limited to 90 A\u003c\/li\u003e\n\u003cli\u003eNumber of battery outlets: 2\u003c\/li\u003e\n\u003cli\u003eInput voltage range: 9-32 V\u003c\/li\u003e\n\u003cli\u003eParallel configuration: Yes\u003c\/li\u003e\n\u003cli\u003eBattery voltage: Automatic 12\/24 V detection\u003c\/li\u003e\n\u003cli\u003eRemote switch functions: On, off, auto, start assist\u003c\/li\u003e\n\u003cli\u003eDimensions, hxwxd: 157 x 140 x 80 mm\/6.2 x 5.5 x 3.1 inch\u003c\/li\u003e\n\u003cli\u003eWeight: 0,88 kg\/1.9 lb\u003c\/li\u003e\n\u003cli\u003eCompliance: CE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConnection possibilities: 3 x fast-on connectors (switch, ground, and status) • switch: for an optional single pole ON-OFF-ON switch for remote operation • status: for an optional LED indicator\u003c\/li\u003e\n\u003cli\u003ePower consumption: Switch open: \u0026lt; 1 mA at 12\/24 V DC\u003c\/li\u003e\n\u003cli\u003eBattery types: Suitable for charging from Lithium starter batteries to all types of batteries (for AGM\/GEL starter battery applications, please use 83309002)\u003c\/li\u003e\n\u003cli\u003eSwitch on voltage: 13.7 V (12 V) \/ 27.4 V (24 V)\u003c\/li\u003e\n\u003cli\u003eSwitch on delay: 5 sec\u003c\/li\u003e\n\u003cli\u003eSwitch off voltage: 13.3 V (12 V) \/ 26.6 V (24 V)\u003c\/li\u003e\n\u003cli\u003eSwitch off delay: 2,5 sec\u003c\/li\u003e\n\u003cli\u003eRelay: Electronically (MOSFETs with a low voltage drop of max 0.2 V)\u003c\/li\u003e\n\u003cli\u003eTemperature range (ambient temp.): -40 °C to 60\u003c\/li\u003e\n\u003cli\u003eProtection degree: IP65\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":46488522686534,"sku":"GCO-103706","price":458.24,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/103706XL_8bf43cf0-94a6-4363-b10c-1710e21cc8de.jpg?v=1788876437"},{"product_id":"analytic-systems-ac-charger-2-bank-70a-12v-out-85-264vac-in-power-factor-correction","title":"Analytic Systems AC Charger 2-Bank 70A, 12V Out, 85-264VAC In Power-Factor Correction","description":"\u003cp\u003e\u003cstrong\u003eAC Charger 2-Bank 70A, 12V Out, 85-264VAC In Power-Factor Correction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe BCA1050 Series battery charger provides up to 1000 watts of charging power to a one- or two-bank battery system at 12, 24, 32, 36, 48, or 72 (rail) VDC from an 85 – 264 VAC source.\u003c\/p\u003e\u003cp\u003eThe BCA1050 Series chargers (BCA) and power supplies (PWS) are designed to supply a DC load or charge a battery at 12, 24, 32, 36, 48, or 72 (rail) VDC. The 1050 family provides up to 1000 watts of precision power, while the 1550 family can supply up to 1550 watts. These 1050 and 1550 families are identical to their previous models (1005 and 1505, respectively) in form, fit, and function as a direct drop-in replacement.\u003c\/p\u003e\u003cp\u003eInternally, the recently updated design incorporates a Power Factor Corrected (PFC) input stage. The PFC input stage increases efficiency over the previous auto-switching technology. It eliminates the dead spot between 110 and 220 VAC input, allowing the power supply to run continuously from 85 to 264 VAC at 45 to 65 Hz. Heavy input and output filtering also reduce EMI to deficient levels to prevent radio interference. Extra features include visual indicators for low input voltage, charging, and overtemperature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower Factor Corrected AC Input\u003c\/li\u003e\n\u003cli\u003eFast and accurate charging\u003c\/li\u003e\n\u003cli\u003eCan function as a power supply\u003c\/li\u003e\n\u003cli\u003eVisual indicators for operation and errors\u003c\/li\u003e\n\u003cli\u003eFive-year parts and labor warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFunction: Battery charger\u003c\/li\u003e\n\u003cli\u003eConversion: AC to DC\u003c\/li\u003e\n\u003cli\u003ePower Level: 1000\u003c\/li\u003e\n\u003cli\u003eInput Volts: 85 – 264 VAC, 110 VAC, 110\/220 VAC, 220 VAC\u003c\/li\u003e\n\u003cli\u003ePower Factor Corrected (PFC): Yes\u003c\/li\u003e\n\u003cli\u003eOutput Volts: 12 VDC\u003c\/li\u003e\n\u003cli\u003eOutput Amps Continuous: 80\u003c\/li\u003e\n\u003cli\u003eInput\/Output Isolation: Yes\u003c\/li\u003e\n\u003cli\u003eTechnology: Analog\u003c\/li\u003e\n\u003cli\u003eCharging Stages: 3\u003c\/li\u003e\n\u003cli\u003eTemperature Compensation: Yes\u003c\/li\u003e\n\u003cli\u003eEqualize: Yes\u003c\/li\u003e\n\u003cli\u003eBattery Banks: 2\u003c\/li\u003e\n\u003cli\u003eProduct Series on the website: BCA1050\u003c\/li\u003e\n\u003cli\u003eOptions Codes: 'Z' No Conformal Coating (Any Model), 'V' Digital Volt\/Ammeter, 'U' Safety Special Inspection (CSA\/UL), 'P' Portable (Handle \u0026amp; Feet), 'M' Military Rugged, 'E' European ROHS compliant\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Analytic Systems","offers":[{"title":"Default Title","offer_id":46488582193222,"sku":"GCO-104280","price":1587.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/104280XL_5e931cc3-d2a3-4502-81b7-e041dfea6d75.jpg?v=1788877567"},{"product_id":"dual-pro-ps2-2-bank-battery-charger-w-2-bank-b-o-s","title":"Dual Pro PS2 2 Bank Battery Charger w\/2 Bank B.O.S.","description":"\u003cp\u003e\u003cstrong\u003ePS2 2 Bank Battery Charger with 2 Bank B.O.S.\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThis kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 2-Bank (PN: BOS12V2) and Dual Pro's Professional Series Battery Charger - 30A - 2-15A-Banks- 12V\/24V (PN: PS2).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eB.O.S. Battery Optimization System - 12V - 2-Bank\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eB.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.\u003c\/p\u003e\u003cp\u003eBatteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and\/or to assist the cranking battery.\u003c\/p\u003e\u003cp\u003eB.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.\u003c\/p\u003e\u003cp\u003eB.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.\u003c\/p\u003e\u003cp\u003ePremature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAvailable in 6V, 8V, and 12V configuration\u003c\/li\u003e\n\u003cli\u003eUp to six batteries in a series\u003c\/li\u003e\n\u003cli\u003eBattery Selection and Prediction (BSAP-24) algorithm\u003c\/li\u003e\n\u003cli\u003eLess than 1mA sleep mode\u003c\/li\u003e\n\u003cli\u003eTransfer rate up to 7.5A\u003c\/li\u003e\n\u003cli\u003eSelf-powered\u003c\/li\u003e\n\u003cli\u003eAny type of battery chemistry\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eUsed in Any Application Where Batteries Are in Series:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine\u003c\/li\u003e\n\u003cli\u003eGolf\u003c\/li\u003e\n\u003cli\u003eIndustrial\u003c\/li\u003e\n\u003cli\u003eAerial Equipment\u003c\/li\u003e\n\u003cli\u003eSolar Power\u003c\/li\u003e\n\u003cli\u003eElectrical Vehicles\u003c\/li\u003e\n\u003cli\u003eCommunications\u003c\/li\u003e\n\u003cli\u003eDefense\/Military\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProfessional Series Battery Charger - 30A - 2-15A-Banks- 12V\/24V\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best-performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBattery Charging System Designed for Use On Land and in Fresh and Salt Water:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe “Green” Charger: Totally “Repairable” Not a Throw-Away\u003c\/li\u003e\n\u003cli\u003eUnmatched Performance, Reliability, Safety and Quality\u003c\/li\u003e\n\u003cli\u003eTROUBLE FREE – Just Plug It In and Forget It!\u003c\/li\u003e\n\u003cli\u003eJoin Over 750,000 of Dual Pro’s Satisfied Customers!\u003c\/li\u003e\n\u003cli\u003eFully Automatic and Waterproof\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApproved for Wet Cell and AGM batteries\u003c\/li\u003e\n\u003cli\u003eModels also available for Gelled Electrolyte batteries\u003c\/li\u003e\n\u003cli\u003eDesigned for use in fresh and saltwater\u003c\/li\u003e\n\u003cli\u003eDeltaVolt® Intuitive Charging Technology\u003c\/li\u003e\n\u003cli\u003eWaterproof, dependable, rugged construction\u003c\/li\u003e\n\u003cli\u003eIndependent outputs\u003c\/li\u003e\n\u003cli\u003eFully automatic\/multi stage charging\u003c\/li\u003e\n\u003cli\u003eZero spark technology\u003c\/li\u003e\n\u003cli\u003eBattery maintenance mode\u003c\/li\u003e\n\u003cli\u003eOn-board diagnostic codes\u003c\/li\u003e\n\u003cli\u003eTemperature-compensated\u003c\/li\u003e\n\u003cli\u003eAdvanced microprocessor controlled\u003c\/li\u003e\n\u003cli\u003eBattery systems available: 12V – 48V\u003c\/li\u003e\n\u003cli\u003eLED lights indicate the state of charge\u003c\/li\u003e\n\u003cli\u003eReverse polarity protected\u003c\/li\u003e\n\u003cli\u003eNo installation restrictions\u003c\/li\u003e\n\u003cli\u003eFCC Parts A \u0026amp; B interference-compliant\u003c\/li\u003e\n\u003cli\u003eDC charge cables = 5' AC power cord = 3'\u003c\/li\u003e\n\u003cli\u003eApproved and meets ISO 8846 Marine standards\u003c\/li\u003e\n\u003cli\u003eIgnition protected (US Coast Guard 33 CFR 183.410\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMay Be Used in Many Types of Sporting Applications Including:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInland Watercraft\u003c\/li\u003e\n\u003cli\u003eSalt Water Watercraft\u003c\/li\u003e\n\u003cli\u003eMotorcycles\u003c\/li\u003e\n\u003cli\u003eGolf Carts\u003c\/li\u003e\n\u003cli\u003eUtility Vehicles\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Dual Pro","offers":[{"title":"Default Title","offer_id":46488604573766,"sku":"GCO-104765","price":885.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/104765XL_15cba614-79df-4e70-9ff6-f042e267b900.jpg?v=1790123905"},{"product_id":"dual-pro-ps3-3-bank-battery-charger-w-2-bank-b-o-s","title":"Dual Pro PS3 3 Bank Battery Charger w\/2 Bank B.O.S.","description":"\u003cp\u003e\u003cstrong\u003ePS3 3 Bank Battery Charger with 2 Bank B.O.S.\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThis kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 2-Bank (PN: BOS12V2) and Dual Pro's Professional Series Battery Charger - 45A - 3-15A-Banks - 12V-36V (PN: PS3).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eB.O.S. Battery Optimization System - 12V - 2-Bank\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eB.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.\u003c\/p\u003e\u003cp\u003eBatteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and\/or to assist the cranking battery.\u003c\/p\u003e\u003cp\u003eB.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.\u003c\/p\u003e\u003cp\u003eB.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.\u003c\/p\u003e\u003cp\u003ePremature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAvailable in 6V, 8V, and 12V configuration\u003c\/li\u003e\n\u003cli\u003eUp to six batteries in a series\u003c\/li\u003e\n\u003cli\u003eBattery Selection and Prediction (BSAP-24) algorithm\u003c\/li\u003e\n\u003cli\u003eLess than 1mA sleep mode\u003c\/li\u003e\n\u003cli\u003eTransfer rate up to 7.5A\u003c\/li\u003e\n\u003cli\u003eSelf-powered\u003c\/li\u003e\n\u003cli\u003eAny type of battery chemistry\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eUsed in Any Application Where Batteries Are in Series:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine\u003c\/li\u003e\n\u003cli\u003eGolf\u003c\/li\u003e\n\u003cli\u003eIndustrial\u003c\/li\u003e\n\u003cli\u003eAerial Equipment\u003c\/li\u003e\n\u003cli\u003eSolar Power\u003c\/li\u003e\n\u003cli\u003eElectrical Vehicles\u003c\/li\u003e\n\u003cli\u003eCommunications\u003c\/li\u003e\n\u003cli\u003eDefense\/Military\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProfessional Series Battery Charger - 45A - 3-15A-Banks - 12V-36V\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best-performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBattery Charging System Designed for Use On Land and in Fresh and Salt Water:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe “Green” Charger: Totally “Repairable” Not a Throw-Away\u003c\/li\u003e\n\u003cli\u003eUnmatched Performance, Reliability, Safety and Quality\u003c\/li\u003e\n\u003cli\u003eTROUBLE FREE – Just Plug It In and Forget It!\u003c\/li\u003e\n\u003cli\u003eJoin Over 750,000 of Dual Pro’s Satisfied Customers!\u003c\/li\u003e\n\u003cli\u003eFully Automatic and Waterproof\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApproved for Wet Cell and AGM batteries\u003c\/li\u003e\n\u003cli\u003eModels also available for Gelled Electrolyte batteries\u003c\/li\u003e\n\u003cli\u003eDesigned for use in fresh and saltwater\u003c\/li\u003e\n\u003cli\u003eDeltaVolt® Intuitive Charging Technology\u003c\/li\u003e\n\u003cli\u003eWaterproof, dependable, rugged construction\u003c\/li\u003e\n\u003cli\u003eIndependent outputs\u003c\/li\u003e\n\u003cli\u003eFully automatic\/multi-stage charging\u003c\/li\u003e\n\u003cli\u003eZero spark technology\u003c\/li\u003e\n\u003cli\u003eBattery maintenance mode\u003c\/li\u003e\n\u003cli\u003eOn-board diagnostic codes\u003c\/li\u003e\n\u003cli\u003eTemperature-compensated\u003c\/li\u003e\n\u003cli\u003eAdvanced microprocessor controlled\u003c\/li\u003e\n\u003cli\u003eBattery systems available: 12V – 48V\u003c\/li\u003e\n\u003cli\u003eLED lights indicate the state of charge\u003c\/li\u003e\n\u003cli\u003eReverse polarity protected\u003c\/li\u003e\n\u003cli\u003eNo installation restrictions\u003c\/li\u003e\n\u003cli\u003eFCC Parts A \u0026amp; B interference-compliant\u003c\/li\u003e\n\u003cli\u003eDC charge cables = 5' AC power cord = 3'\u003c\/li\u003e\n\u003cli\u003eApproved and meets ISO 8846 Marine standards\u003c\/li\u003e\n\u003cli\u003eIgnition protected (US Coast Guard 33 CFR 183.410)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMay Be Used in Many Types of Sporting Applications Including:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInland Watercraft\u003c\/li\u003e\n\u003cli\u003eSalt Water Watercraft\u003c\/li\u003e\n\u003cli\u003eMotorcycles\u003c\/li\u003e\n\u003cli\u003eGolf Carts\u003c\/li\u003e\n\u003cli\u003eUtility Vehicles\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Dual Pro","offers":[{"title":"Default Title","offer_id":46488604606534,"sku":"GCO-104766","price":1104.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/104766XL.jpg?v=1789733891"},{"product_id":"dual-pro-ps3-3-bank-battery-charger-w-3-bank-b-o-s","title":"Dual Pro PS3 3 Bank Battery Charger w\/3 Bank B.O.S.","description":"\u003cp\u003e\u003cstrong\u003ePS3 3 Bank Battery Charger with 3 Bank B.O.S.\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThis kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 3-Bank (PN: BOS12V3) and Dual Pro’s Professional Series Battery Charger - 45A - 3-15A-Banks - 12V-36V (PN: PS3).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eB.O.S. (Battery Optimization System) - 12V - 3-Bank\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eB.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.\u003c\/p\u003e\u003cp\u003eBatteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and\/or to assist the cranking battery.\u003c\/p\u003e\u003cp\u003eB.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.\u003c\/p\u003e\u003cp\u003eB.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.\u003c\/p\u003e\u003cp\u003ePremature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAvailable in 6V, 8V, and 12V configuration\u003c\/li\u003e\n\u003cli\u003eUp to six batteries in a series\u003c\/li\u003e\n\u003cli\u003eBattery Selection and Prediction (BSAP-24) algorithm\u003c\/li\u003e\n\u003cli\u003eLess than 1mA sleep mode\u003c\/li\u003e\n\u003cli\u003eTransfer rate up to 7.5A\u003c\/li\u003e\n\u003cli\u003eSelf-powered\u003c\/li\u003e\n\u003cli\u003eAny type of battery chemistry\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eUsed in Any Application Where Batteries Are in Series:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine\u003c\/li\u003e\n\u003cli\u003eGolf\u003c\/li\u003e\n\u003cli\u003eIndustrial\u003c\/li\u003e\n\u003cli\u003eAerial Equipment\u003c\/li\u003e\n\u003cli\u003eSolar Power\u003c\/li\u003e\n\u003cli\u003eElectrical Vehicles\u003c\/li\u003e\n\u003cli\u003eCommunications\u003c\/li\u003e\n\u003cli\u003eDefense\/Military\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProfessional Series Battery Charger - 45A - 3-15A-Banks - 12V-36V\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best-performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBattery Charging System Designed for Use On Land and in Fresh and Salt Water:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe “Green” Charger: Totally “Repairable” Not a Throw-Away\u003c\/li\u003e\n\u003cli\u003eUnmatched Performance, Reliability, Safety and Quality\u003c\/li\u003e\n\u003cli\u003eTROUBLE FREE – Just Plug It In and Forget It!\u003c\/li\u003e\n\u003cli\u003eJoin Over 750,000 of Dual Pro’s Satisfied Customers!\u003c\/li\u003e\n\u003cli\u003eFully Automatic and Waterproof\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApproved for Wet Cell and AGM batteries\u003c\/li\u003e\n\u003cli\u003eModels also available for Gelled Electrolyte batteries\u003c\/li\u003e\n\u003cli\u003eDesigned for use in fresh and saltwater\u003c\/li\u003e\n\u003cli\u003eDeltaVolt® Intuitive Charging Technology\u003c\/li\u003e\n\u003cli\u003eWaterproof, dependable, rugged construction\u003c\/li\u003e\n\u003cli\u003eIndependent outputs\u003c\/li\u003e\n\u003cli\u003eFully automatic\/multi-stage charging\u003c\/li\u003e\n\u003cli\u003eZero spark technology\u003c\/li\u003e\n\u003cli\u003eBattery maintenance mode\u003c\/li\u003e\n\u003cli\u003eOn-board diagnostic codes\u003c\/li\u003e\n\u003cli\u003eTemperature-compensated\u003c\/li\u003e\n\u003cli\u003eAdvanced microprocessor controlled\u003c\/li\u003e\n\u003cli\u003eBattery systems available: 12V – 48V\u003c\/li\u003e\n\u003cli\u003eLED lights indicate the state of charge\u003c\/li\u003e\n\u003cli\u003eReverse polarity protected\u003c\/li\u003e\n\u003cli\u003eNo installation restrictions\u003c\/li\u003e\n\u003cli\u003eFCC Parts A \u0026amp; B interference-compliant\u003c\/li\u003e\n\u003cli\u003eDC charge cables = 5' AC power cord = 3'\u003c\/li\u003e\n\u003cli\u003eApproved and meets ISO 8846 Marine standards\u003c\/li\u003e\n\u003cli\u003eIgnition protected (US Coast Guard 33 CFR 183.410\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMay Be Used in Many Types of Sporting Applications Including:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInland Watercraft\u003c\/li\u003e\n\u003cli\u003eSalt Water Watercraft\u003c\/li\u003e\n\u003cli\u003eMotorcycles\u003c\/li\u003e\n\u003cli\u003eGolf Carts\u003c\/li\u003e\n\u003cli\u003eUtility Vehicles\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Dual Pro","offers":[{"title":"Default Title","offer_id":46488604639302,"sku":"GCO-104767","price":1104.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/104767XL_2a50fcae-5c39-4b50-a137-0435fede5812.jpg?v=1790026812"},{"product_id":"dual-pro-ps4-4-bank-battery-charger-w-2-bank-b-o-s","title":"Dual Pro PS4 4 Bank Battery Charger w\/2 Bank B.O.S.","description":"\u003cp\u003e\u003cstrong\u003ePS4 4 Bank Battery Charger with 2 Bank B.O.S.\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThis kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 2-Bank (PN: BOS12V2) and Dual Pro’s Professional Series Battery Charger - 60A - 4-15A-Banks - 12V-48V (PN: PS4).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eB.O.S. Battery Optimization System - 12V - 2-Bank\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eB.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.\u003c\/p\u003e\u003cp\u003eBatteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and\/or to assist the cranking battery.\u003c\/p\u003e\u003cp\u003eB.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.\u003c\/p\u003e\u003cp\u003eB.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.\u003c\/p\u003e\u003cp\u003ePremature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAvailable in 6V, 8V, and 12V configuration\u003c\/li\u003e\n\u003cli\u003eUp to six batteries in a series\u003c\/li\u003e\n\u003cli\u003eBattery Selection and Prediction (BSAP-24) algorithm\u003c\/li\u003e\n\u003cli\u003eLess than 1mA sleep mode\u003c\/li\u003e\n\u003cli\u003eTransfer rate up to 7.5A\u003c\/li\u003e\n\u003cli\u003eSelf-powered\u003c\/li\u003e\n\u003cli\u003eAny type of battery chemistry\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eUsed in Any Application Where Batteries Are in Series:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine\u003c\/li\u003e\n\u003cli\u003eGolf\u003c\/li\u003e\n\u003cli\u003eIndustrial\u003c\/li\u003e\n\u003cli\u003eAerial Equipment\u003c\/li\u003e\n\u003cli\u003eSolar Power\u003c\/li\u003e\n\u003cli\u003eElectrical Vehicles\u003c\/li\u003e\n\u003cli\u003eCommunications\u003c\/li\u003e\n\u003cli\u003eDefense\/Military\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProfessional Series Battery Charger - 60A - 4-15A-Banks - 12V-48V\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best-performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBattery Charging System Designed for Use On Land and in Fresh and Salt Water:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe “Green” Charger: Totally “Repairable” Not a Throw-Away\u003c\/li\u003e\n\u003cli\u003eUnmatched Performance, Reliability, Safety and Quality\u003c\/li\u003e\n\u003cli\u003eTROUBLE FREE – Just Plug It In and Forget It!\u003c\/li\u003e\n\u003cli\u003eJoin Over 750,000 of Dual Pro’s Satisfied Customers!\u003c\/li\u003e\n\u003cli\u003eFully Automatic and Waterproof\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApproved for Wet Cell and AGM batteries\u003c\/li\u003e\n\u003cli\u003eModels also available for Gelled Electrolyte batteries\u003c\/li\u003e\n\u003cli\u003eDesigned for use in fresh and saltwater\u003c\/li\u003e\n\u003cli\u003eDeltaVolt® Intuitive Charging Technology\u003c\/li\u003e\n\u003cli\u003eWaterproof, dependable, rugged construction\u003c\/li\u003e\n\u003cli\u003eIndependent outputs\u003c\/li\u003e\n\u003cli\u003eFully automatic\/multi-stage charging\u003c\/li\u003e\n\u003cli\u003eZero spark technology\u003c\/li\u003e\n\u003cli\u003eBattery maintenance mode\u003c\/li\u003e\n\u003cli\u003eOn-board diagnostic codes\u003c\/li\u003e\n\u003cli\u003eTemperature-compensated\u003c\/li\u003e\n\u003cli\u003eAdvanced microprocessor controlled\u003c\/li\u003e\n\u003cli\u003eBattery systems available: 12V – 48V\u003c\/li\u003e\n\u003cli\u003eLED lights indicate the state of charge\u003c\/li\u003e\n\u003cli\u003eReverse polarity protected\u003c\/li\u003e\n\u003cli\u003eNo installation restrictions\u003c\/li\u003e\n\u003cli\u003eFCC Parts A \u0026amp; B interference-compliant\u003c\/li\u003e\n\u003cli\u003eDC charge cables = 5' AC power cord = 3'\u003c\/li\u003e\n\u003cli\u003eApproved and meets ISO 8846 Marine standards\u003c\/li\u003e\n\u003cli\u003eIgnition protected (US Coast Guard 33 CFR 183.410\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMay Be Used in Many Types of Sporting Applications Including:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInland Watercraft\u003c\/li\u003e\n\u003cli\u003eSalt Water Watercraft\u003c\/li\u003e\n\u003cli\u003eMotorcycles\u003c\/li\u003e\n\u003cli\u003eGolf Carts\u003c\/li\u003e\n\u003cli\u003eUtility Vehicles\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lll5do ---\u003e","brand":"Dual Pro","offers":[{"title":"Default Title","offer_id":46488604704838,"sku":"GCO-104768","price":1276.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/5351\/5334\/files\/104768XL.jpg?v=1789733895"}],"url":"https:\/\/gulfcoastoutfitters.com\/collections\/battery-chargers.oembed","provider":"Gulf Coast Outfitters","version":"1.0","type":"link"}